Abstract:This study explored the feasibility of fluoride removal from simulated semiconductor industry wastewater and its recovery as calcium fluoride using fluidized bed crystallization. The continuous reactor showed the best performance (>90% fluoride removal and >95% crystallization efficiency) at a calcium-to-fluoride ratio of 0.6 within the first 40 days of continuous operation. The resulting particle size increased by more than double during this time, along with a 36% increase in the seed bed height, indicating the deposition of CaF2 onto the silica seed. The SEM-EDX analysis showed the size and shape of the crystals formed, along with the presence of a high amount of Ca-F ions. The purity of the CaF2 crystals was determined to be 91.1% though ICP-OES analysis. Following the continuous experiment, different process improvement strategies were explored. The addition of an excess amount of calcium resulted in the removal of an additional 6% of the fluoride; however, compared to this single-stage process, a two-stage approach was found to be a better strategy to achieve a low effluent concentration of fluoride. The fluoride removal reached 94% with this two-stage approach under the optimum conditions of 4 + 1 h HRT combinations and a [Ca2+]/[F−] ratio of 0.55 and 0.7 for the two reactors, respectively. CFD simulation showed the impact of the inlet diameter, bottom-angle shape, and width-to-height ratio of the reactor on the mixing inside the reactor and the possibility of further improvement in the reactor performance by optimizing the FBR configuration.

Recovery and Removal of Fluoride from Concentrated Fluorine-containing Wastewater by Crystal Seed

Treatment of High-concentration Fluoride Wastewater by Crystal Seed Process and Granulation of Calcium Fluoride

Laboratory and Pilot-scale Treatment of Industrial Fluorine-containing Wastewater by Fluidized Bed Crystallization Process

Combing Seeding Crystallization with Flotation for Recovery of Fluorine from Wastewater: Experimental and Molecular Simulation Studies

Treatment and Resource Recovery from Inorganic Fluoride-Containing Waste Produced by the Pesticide Industry

Phosphorus removal and recovery from wastewater by highly efficient struvite crystallization in an improved fluidized bed reactor

Efficient recovery of highly pure CaF2 from fluorine-containing wastewater using an icy lime solution

The Study of Removing Fluoride in Desulphurization Waste Water from Power Plants

Recovery and removal of fluoride from fluorine industrial wastewater by crystallization process: a pilot study

Optimization of Calcium Fluoride Crystallization Process for Treatment of High-Concentration Fluoride-Containing Semiconductor Industry Wastewater

Process Intensification for Enhanced Fluoride Removal and Recovery as Calcium Fluoride Using a Fluidized Bed Reactor

Precipitation Methods Using Calcium-Containing Ores for Fluoride Removal in Wastewater

Removal and Recovery of Fluoride from Wastewater by Crystallization: Effect of Aluminum

An integrated separation technology for high fluoride-containing wastewater treatment: Fluoride removal, membrane fouling behavior and control

Preparation of Cryolite from High Fluoride-containing Wastewater

Pilot test on acidic fluoride-containing wastewater treatment in the photovoltaic industry through induced crystallization with a focus on calcium fluoride recovery

Treatment of Wastewater Containing Fluorine of Polycrystalline Silicon Factory

Removal of aqueous fluoride ion with limestone reactor

Seeded Precipitation of the Coarse Sodium Fluoride with High Purity for Efficient Removal of Fluoride Ion from Sodium Aluminate Solutions

Synergistic removal of fluoride from groundwater by seed crystals and bacteria based on microbially induced calcium precipitation

A Pilot-Scale Study of Cryolite Precipitation from High Fluoride-Containing Wastewater in a Reaction-Separation Integrated Reactor.