Abstract:Recent experiments in DIII-D [J. L. Luxon et al., in Plasma Physics and Controlled Nuclear Fusion Research 1996 (International Atomic Energy Agency, Vienna, 1987), Vol. I, p. 159] have led to the discovery of a means of modifying edge turbulence to achieve stationary, high confinement operation without Edge Localized Mode (ELM) instabilities and with no net external torque input. Eliminating the ELM-induced heat bursts and controlling plasma stability at low rotation represent two of the great challenges for fusion energy. By exploiting edge turbulence in a novel manner, we achieved excellent tokamak performance, well above the H98y2 international tokamak energy confinement scaling (H98y2 = 1.25), thus meeting an additional confinement challenge that is usually difficult at low torque. The new regime is triggered in double null plasmas by ramping the injected torque to zero and then maintaining it there. This lowers E × B rotation shear in the plasma edge, allowing low-k, broadband, electromagnetic turbulence to increase. In the H-mode edge, a narrow transport barrier usually grows until MHD instability (a peeling ballooning mode) leads to the ELM heat burst. However, the increased turbulence reduces the pressure gradient, allowing the development of a broader and thus higher transport barrier. A 60% increase in pedestal pressure and 40% increase in energy confinement result. An increase in the E × B shearing rate inside of the edge pedestal is a key factor in the confinement increase. Strong double-null plasma shaping raises the threshold for the ELM instability, allowing the plasma to reach a transport-limited state near but below the explosive ELM stability boundary. The resulting plasmas have burning-plasma-relevant βN = 1.6–1.8 and run without the need for extra torque from 3D magnetic fields. To date, stationary conditions have been produced for 2 s or 12 energy confinement times, limited only by external hardware constraints. Stationary operation with improved pedestal conditions is highly significant for future burning plasma devices, since operation without ELMs at low rotation and good confinement is key for fusion energy production.

Dynamic Formation Of A Hot Field Reversed Configuration With Improved Confinement By Supersonic Merging Of Two Colliding High-Beta Compact Toroids

Overview of Experimental Results on the HL-2A Tokamak

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Modeling of the merging of two colliding field reversed configuration plasmoids

Field-reversed Configuration Formed by In-Vessel Θ-Pinch in a Tandem Mirror Device

Complete and robust magnetic field confinement by superconductors in fusion magnets

Observation of rapid flux coalescence in merging field-reversed configurations

Experimental study on the formation and evolution of unconfined counter-helicity spheromaks merging using magnetized coaxial plasma gun

Enhanced plasma performance in C-2W advanced beam-driven field-reversed configuration experiments

Magnetic Levitation and Compression of Compact Tori

Simulation on formation process of field-reversed configuration

Deuterium–tritium Plasmas in Novel Regimes in the Tokamak Fusion Test Reactor

Suppression of radial motion in translated field-reversed configuration plasma via global gyro-effect

MHD Simulations on Magnetic Compression of Field Reversed Configurations

Discovery of stationary operation of quiescent H-mode plasmas with net-zero neutral beam injection torque and high energy confinement on DIII-D

Role of in-plane electric field during merging formation of spherical tokamak plasmas

Energy-selective confinement of fusion-born alpha particles during internal relaxations in a tokamak plasma

Imposed magnetic field and hot electron propagation in inertial fusion hohlraums

Laboratory Observation of Plasmoid-Dominated Magnetic Reconnection in Hybrid Collisional-Collisionless Regime

The SPARC Toroidal Field Model Coil Program

Physics of High Performance Deuterium-Tritium Plasmas in Tftr