Abstract:Abstract Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintain their key advantages like comfort, softness, and stretchability. Herein, an atmospheric pressure dielectric barrier discharge (DBD) plasma method is demonstrated for the processing of silk fabrics using 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDS) as the precursor. The results showed the successful grafting of PFDS groups on the surface of silk fabrics without causing damage. Meanwhile, the gas temperature is rather low during the whole processing procedure, suggesting the non-equilibrium characteristics of DBD plasma. The influence of processing parameters on fabrics was systematically investigated, like the PFDS concentration, plasma treatment time, and plasma discharge power. An optimum processing condition was determined to be PFDS concentration: 8 wt%, plasma processing time: 40 s, and plasma power: 11.87 W. However, with the prolonged plasma processing time or enhanced plasma power, the plasma-grafted PFDS films could be degraded. Further study revealed that plasma processing of silk fabrics with PFDS would lead to the change of their chemical composition and surface roughness. As a result, the surface energy of the fabrics was reduced, accompanied by the improved water and oil repellency properties as well as enhanced antifouling performance. Besides, the plasma-grafted PFDS films also had good durability and stability. By extending the fabrics to polyester and wool against different oil-/water-based stains, the DBD plasma surface modification technique demonstrated good versatility in improving the antifouling properties of fabrics. This work provides a guidance for the surface modification of fabrics using DBD plasma to confer them with desirable functionalities.

Effect of CF_4 LTP-plasma treatment on properties of wool fabrics

The Effect on Structure and Properties of Wool Fiber Treated with Atmospheric Pressure Plasma

Effect of Washing and Subsequent Heat Treatment on the Water Repellency of Poly(ethylene terephthalate) Fabric and Film Treated with Carbon Tetrafluoride and Trifluoromethane Low-Temperature Plasmas.

Study on Bombyx Mori Silk Treated by Oxygen Plasma

A Study on Silk Surface Modification with Carbon Tetrafluoride Low Temperature Plasma

Effect of Wetting Pretreatment on Structure and Properties of Plasma Induced Chitosan Grafted Wool Fabric

Study on the process of knitted woolen fabric treatment based on oxygen low-temperature plasma

Developing Super-Hydrophobic and Abrasion-Resistant Wool Fabrics Using Low-Pressure Hexafluoroethane Plasma Treatment

Surface Modification of Fabrics Using Dielectric Barrier Discharge Plasma for Improved Antifouling Performance

Study on Ageing of Surface Modified by Low-temperature Plasma for Fabrics

Effects of Oxygen Plasma Treatment on the Physical and Chemical Properties of Wool Fiber Surface

Digital printing of wool fabric treated with atmospheric pressure plasma

Influence of absorbed moisture on antifelting property of wool treated with atmospheric pressure plasma

A Review on Surface Modification of Wool Fibers Using Plasma Technology and Its Effect on Dyeing Properties

Effect of Cold Plasma Treatment on Surface of Properties PET Fibers

The Impact of Nitrogen Plasma Treatment upon the Physical-Chemical and Dyeing Properties of Wool Fabric

Effect of Atmospheric Pressure Plasma and Subsequent Enzymatic Treatment on Flax Fabrics

Studies on the Surface Modification of High Performance Organic Fibers by the Plasma Technology

AIR COLD PLASMA MODIFICATION ON PBO FIBER SURFACE

STUDY ON THE AFFECT OF LOW TEMPERATURE PLASMA TREATMENT ON SURFACE MODIFICATION OF PBO FIBERS

EFFECT OF WOOL SURFACE MODIFICATION ON WATER REPELLENT AND OIL REPELLENT FINISHINGS