Abstract:A general solution of the vibration of an Euler–Bernoulli beam with arbitrary type of discontinuity at arbitrary number of locations is presented in this paper. To account for the discontinuity term induced by various additional elements on the beam, Heaviside's function is used to express the modal displacement of the whole beam by a single function. This general modal displacement function is then solved by using Laplace transformation. This general solution consists of four types of basic modal shapes induced by four corresponding types of discontinuity terms at the discontinuity points. Various discontinuity terms are obtained and expressed by the boundary values of the modal displacement in a recursive way. Consequently, the modal displacement can be determined by examining only the conditions on the boundary. In such a way, the present solution reduces the vibration of beams with arbitrary discontinuities to the same order of the case without discontinuity point. To demonstrate the efficiency and applicability of the present method, three application examples are presented. Calculation example shows that the lead–zirconate–titanate (PZT) actuator should be placed as close to the fixed end as possible to achieve the best excitation effect on a cantilever beam. A new method to calculate the driving-point anti-resonance frequency is also proposed. Numerical results suggest that the variation of driving-point anti-resonance frequency can be used to determine the location and size of crack in beams. Due to the generic nature of the solution and the problem, the present method can be utilized in smart structures modeling and structural health monitoring of beam-type structures.

Vibration of Continuous Beams Using Modified Beam Vibration Functions

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

Free Vibration of Timoshenko Beams on Elastic Foundation with Horizontal Frictions

Free Vibration of Connected Double-Beam System with General Boundary Conditions by a Modified Fourier–Ritz Method

Vibration and Response of Nonuniform Rotating Beams with Discontinuities

Modified Buckling Modes For Lateral-Torsional Buckling Of Beams

Free and Forced Vibration Characteristics Analysis of a Multispan Timoshenko Beam Based on the Ritz Method

Vibrations of Multi-span Non-uniform Beams with Arbitrary Discontinuities and Complicated Boundary Conditions

Vibration Modes of Centrifugally Stiffened Beams

An Effective Approach for Vibration Analysis of Beam with Arbitrary Sections

An analytical approach to study the dynamic characteristic of beams carrying any type of attachments with arbitrary distributions under elastic constraint boundary supports

Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method

Vibration of beams with arbitrary discontinuities and boundary conditions

Forced and free vibrations of composite beams solved by an energetic boundary functions collocation method

Flexural Vibration Analysis of Nonuniform Double-Beam System with General Boundary and Coupling Conditions

Vibration Analysis of Non-Uniform Timoshenko Beams Coupled with Flexible Attachments and Multiple Discontinuities

A Variational Formulation for Vibration Analysis of Curved Beams with Arbitrary Eccentric Concentrated Elements

Modified transfer matrix method for vibration analysis of beam structures including branches and rigid bodies

Exact Solution of Free Vibration of A Uniform Tensioned Beam Combined with Both Lateral and Rotational Linear Sub-Systems

A Modified Variational Method for Nonlinear Vibration Analysis of Rotating Beams Including Coriolis Effects

On the Transverse Vibration of Timoshenko Double-Beam Systems Coupled with Various Discontinuities