Abstract:In recent years, due to the increase in the incidence of traffic accidents, the number of people with limb injuries has also increased. At the same time, among the aging population, neurological diseases or cardiovascular and cerebrovascular diseases have caused many people to have limb hemiplegia. It has been clinically proven that the use of rehabilitation equipment can help patients with limb injuries to restore limb motor function. This paper takes wearable lower limb rehabilitation exoskeleton as the research object, and its main contents are mechanical structure design, kinematics analysis, gait planning, virtual prototype simulation, and experimental verification and analysis. Based on the physiological characteristics of human body and the principle of comfortable and reliable wearing, this paper designs wearable exoskeleton for lower limb rehabilitation. Firstly, the physiological structure characteristics and movement mechanism of human lower limbs were studied and analyzed. By referring to the rotation range and height and size of each joint of human lower limbs, the overall scheme of wearable lower limb rehabilitation exoskeleton was designed and the degree of freedom was allocated. At the same time, Solidworks was used to establish a three-dimensional model. On the basis of a 3D model, a kinematics model was established, and the forward kinematics solution was obtained by using homogeneous coordinate transformation. Since the inverse kinematics solution was relatively complicated, the inverse kinematics solution was conducted in this paper according to the geometric relations of the joints of the lower limbs. Kinematics analysis of the exoskeleton structure of wearable lower limb rehabilitation was carried out to lay a theoretical foundation for gait planning. The off-line gait planning was carried out by using the method based on ZMP stability criterion, and the gait planning was divided into five stages: squat, start, middle step, stop and rise, and the motion trajectory of the center of mass and ankle joint was planned. Based on the inverse kinematics formula, the function of the change of joint angle with time in walking process is derived. The virtual prototype is established in ADAMS, and the simulation of virtual prototype is carried out by using the function of gait planning's joint angle and time. The correctness of structural design and gait planning was verified by measuring the trajectories of the centroid and ankle joints in each gait stage and the functional relationship between the rotation angle of each joint and time. Then, using a 3D dynamic capture system to capture the human lower limb motion trajectory of each joint, each joint trajectory data output, using the MATLAB software to output data, gets the joint trajectory change over time function curve and is used to verify feasibility and applicability of human gait planning. Through the research and analysis of the joints of the lower limbs of the human body, it can be concluded that the hip joint and the knee joint have 3 degrees of freedom, respectively, and the knee joint has 1 degree of freedom.

Dynamics analysis and application of the rehabilitation power assist robot for the leg

Dynamic analysis and design of a multipurpose lower limb exoskeleton for rehabilitation

Dynamic Analysis of Rehabilitative Arm Robot

Design and analysis of a lower limb assistive exoskeleton robot

Dynamics Analysis and Simulation of a New 6-DOF Lower Limb Rehabilitation Robot

Design and Analysis of a Multi-Joint Lower Limbs Rehabilitation Robot

Design and motion control of exoskeleton robot for paralyzed lower limb rehabilitation

Design & Analysis of the Mechanical System for a Spacial 4-DOF Series-parallel Hybrid Lower Limb Rehabilitation Robot

Electrically Driven Lower Limb Exoskeleton Rehabilitation Robot Based on Anthropomorphic Design

Research on Lower Limb Rehabilitation Exoskeleton Control Based on Improved Dynamic Motion Primitives

Structural Design and Experimental Analysis of the Self-Balancing Lower Limb Exoskeleton Robot

Dynamic Modeling and Performance Analysis of a Hip Rehabilitation Robot

Research of a New Rehabilitation and Assisting Robot

Development and Analysis of an Electrically Actuated Lower Extremity Assistive Exoskeleton

Rehabilitation Strategies for the Lower Limb Rehabilitation Robot with Magnetorheological Damper

Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

Kinematics analysis and three-dimensional simulation of the rehabilitation lower extremity exoskeleton robot

The Wearable Lower Limb Rehabilitation Exoskeleton Kinematic Analysis and Simulation

Design and remote collaboration control of asymmetric rigid-flexible hybrid-driven lower limb rehabilitation robot

A Multi-Mode Rehabilitation Robot with Magnetorheological Actuators Based on Human Motion Intention Estimation

Structure Design of Active Power-Assist Lower Limb Exoskeleton APAL Robot