Abstract:Fine chemicals produced via batch crystallization with properties dependent on the crystal size distribution require precise control of supersaturation, which drives the evolution of crystal size over time. Model predictive control (MPC) of supersaturation using a mechanistic model to represent the behavior of a crystallization process requires less experimental time and resources compared with fully empirical model-based control methods. Experimental characterization of the hexamine-ethanol crystallization system was performed in order to collect the parameters required to build a one-dimensional (1D) population balance model (PBM) in gPROMS FormulatedProducts software (Siemens-PSE Ltd.). Analysis of the metastable zone width (MSZW) and a series of seeded batch cooling crystallizations informed the suitable process conditions selected for supersaturation control experiments. The gPROMS model was integrated with the control software PharmaMV (Perceptive Engineering Ltd.) to create a digital twin of the crystallizer. Simulated batch crystallizations were used to train two statistical MPC blocks, allowing for in silico supersaturation control simulations to develop an effective control strategy. In the supersaturation set-point range of 0.012-0.036, the digital twin displayed excellent performance that would require minimal controller tuning to steady out any instabilities. The MPC strategy was implemented on a physical 500 mL crystallizer, with the simulated solution concentration replaced by in situ measurements from calibrated attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. Physical supersaturation control performance was slightly more unstable than the in silico tests, which is consistent with expected disturbances to the heat transfer, which were not specifically modeled in simulations. Overall, the level of supersaturation control in a real crystallizer was found to be accurate and precise enough to consider future adaptations to the MPC strategy for more advanced control objectives, such as the crystal size.

A Comparative Study of Model-Based Control Techniques for Batch Crystallization Process

A New Nonlinear Optimal Control Design Approach for a Chemical Reactor

Temperature Advanced Control System for Batch Chemical Reaction

Modeling and nonlinear predictive functional control of liquid level in a coke fractionation tower

Dynamic Modeling And Nonlinear Predictive Control Based On Partitioned Model And Nonlinear Optimization

Latent-Variable Nonlinear Model Predictive Control Strategy For A Ph Neutralization Process

Research on Tuning Parameters for a Model Predictive Controller Based on CSA in CSTR Process

Studies and Applications of Predictive Functional Control in Temperature Tracking of Chemical Reactors

Linear Mismatched Model Based Offset-Free Mpc For Nonlinear Constrained Systems With Both Stochastic And Deterministic Disturbances And Its Application To Cstr

Structure Restricted (PID) Controller Performance Assessment for Multi-Stage Batch Processes with Tracking and Regulatory Requirements

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

Generic Model Control Method of Temperature of Batch Polypropylene Reaction

Integrated Tracking Control For Batch Processes In The Presence Of Model Uncertainties

Tracking Control for Batch Processes Through Integrating Batch-to-Batch Iterative Learning Control and Within-Batch On-Line Control

A Nonlinear Model Predictive Control Strategy For Superheater Process In Thermal Power Plant

Integrated tracking control of batch processes with model uncertainties by updating a linear perturbation model

Development of a Digital Twin for the Prediction and Control of Supersaturation during Batch Cooling Crystallization

Batch process control from practice to 2D model predictive control

An integrated batch-to-batch iterative learning control and within batch control strategy for batch processes

Application of the method of characteristics to crystallizer simulation and comparison with finite difference for controller performance evaluation

Control of nonlinear jacketed continuous stirred tank reactor using different control structures