Abstract:The field of drones has received a lot of attention in recent years and is developing well. In the process of resource circulation in cities, UAVs play an increasingly important role, such as logistics, monitoring, emergency rescue, etc. However, traditional rotary-wing UAVs and fixed-wing UAVs can be limited in some conditions, such as load, cruising speed and take-off area. Based on the above reasons, this paper designs a rotor-driven VTOL fixed-wing UAV, which combines the vertical take-off and landing of rotor and the fast cruise of fixed-wing UAV and other characteristics. And based on this UAV, for the transition process from hovering state to cruising state, a PID controller is used to control the cruising speed, and then the flight altitude is controlled by a series-level PID controller. The final results show that the cruise speed can be stabilized at about 50km/h within 3 seconds by adjusting the PID parameters without considering the motor speed saturation. In addition, while ensuring the cruise speed reaches convergence quickly, the PID parameters of the acceleration loop, velocity loop and altitude loop can be adjusted separately to control the altitude error of the UAV within 5cm. This study provides a reference for researchers to study the control of rotor-driven UAVs in the transition process.

Study on the blade pitch control of electrically controlled rotor in hover

Modeling and Simulation of the Blade Pitch Control System of the Improved Electrically Controlled Rotor

A Gradient Optimization Based PID Tuning Approach on Quadrotor

STUDY ON ELECTROHYDRAULIC PROPOTION AND PITCH-CONTROLLED TECHNOLOGY OF WIND TURBINE

Motion Control for a Manned Evtol Aircraft with Cross Tilting Propellers

Integral Backstepping-based Nonlinear Flight Control Strategy for Quadrotor Aerial Robot with Unknown Mass

The Hydraulic Pitch-Controlled Technology Of Wind Turbine

Experiment Research on the Testing Electrically Controlled Rotor System

Research on Variable-speed Constant-frequency Individual Pitch-controlled Technology Based on Semi-physical Simulation

Numerical Simulation and Aerodynamic Investigation of the Intermeshing Rotor in Hover

Improved control of individual blade pitch for wind turbines

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Two Models Switched Predictive Pitch Control for Wind Turbine Based on Improved Incremental SVR

RESEARCH ON THE LOAD CONTROL OF WIND TURBINES BASED ON INDIVIDUAL PITCH TECHNOLOGY

Design and Application of an Electric Tail Rotor Drive Control (ETRDC) for Helicopters with Performance Tests

Investigation of the Steady Control Response of Electrically Controlled Rotor

Rotor Cross-Tilt Optimization of Manned Multi-rotor Evtol Aircraft for Yaw Control Efficiency

Incremental Feedforward Collective Pitch Control Method for Wind Turbines

Intelligent Rotor Speed Controller for a Mini Autonomous Helicopter.

Design and Hover Control of a Tilt Tri-rotor Flying-wing Aircraft

Controller design for transition flight of rotor-driven VTOL fixed-wing UAV based on PID