Abstract:This paper provides the stress and electric field intensity factors for some common piezoelectric fracture mechanics specimens with electrically conducting cracks or electrodes. Firstly, the solution for a vertical crack with electrically conducting boundary condition on its surfaces is established for a piezoelectric strip under combining mechanical and electrical loads. Then, a surface-cracked strip, a double edge cracked strip, and a center-cracked strip, subjected to uniform stress and electric field loads simultaneously, are investigated. Also investigated is an edge-cracked strip under pure bending and uniform electric field loads. The influence of piezoelectric effect on the stress and electric field intensity factors is found to be insignificant, suggesting that the stress intensity factors of piezoelectric materials under mechanical loads can be obtained in a same way as ordinary brittle solids, and the electric field intensity factors of piezoelectric materials under electric field loads can be obtained in a same way as ordinary dielectrics. However, the results show that the mechanical loads can produce electric field intensity factors, and the electric field loads can produce stress intensity factors in piezoelectric materials, due to the fact that the medium has finite size.

Crack tip field in piezoelectric/piezomagnetic media

Fracture of piezoelectromagnetic materials

Cracking of Electromagnetic Elastic Solids

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

A PENNY-SHAPED CRACK IN AN INFINITE PIEZOELECTRIC BODY UNDER ANTISYMMETRIC POINT LOADS

Near-Tip Fields for Penny-Shaped Cracks in Magnetoelectroelastic Media

Analysis of A Penny-Shaped Crack in Magnetoelectroelastic Materials

A Cracked Piezoelectric Material under Generalized Plane Electromechanical Impact

Exact And Fundamental Solution For An Anti-Plane Crack Vertical To The Boundaries Of A Magnetoelectroelastic Strip

Mode Iii Fracture of A Magnetoelectroelastic Layer: Exact Solution and Discussion of the Crack Face Electromagnetic Boundary Conditions

Plane Electromechanical Fieldes in a Piezoelectric Material with a Crack

Exact Solution For Mode Iii Cracks In A Magnetoelectroelastic Layer

Fundamental Solution for A Penny-Shaped Crack in A Piezoelectric Medium

A penny-shaped crack in a transversely isotropic piezoelectric layer

Electroelastic Field for a Blunt Crack in an Anisotropic Piezoelectric Material

Intensity Factors for Some Common Piezoelectric Fracture Mechanics Specimens with Conducting Cracks or Electrodes

Effect of Maxwell Stresses on the Thermal Crack Tip Field for Piezoelectric Materials

Dynamic response for non-homogeneous piezoelectric medium with multiple cracks

Stress and electric displacement analyses in piezoelectric media with an elliptic hole and a small crack

Isolated crack in three-dimensional piezoelectric solid. Part II: Stress intensity factors for circular crack

Mixed mode crack initiation in piezoelectric ceramic strip