Abstract:Optical coherence tomography (OCT) is a medical optical imaging technique that can achieve high-resolution 3D images (1 15 m)1 by detecting infrared light scattered by body tissue. It has an imaging depth range of about 3mm in highly-scattered tissue and has already been widely used for external imaging, e.g., for eye diseases and skin cancer diagnosis. It would be useful to apply OCT to internal imaging, since about 85% of all cancers originate from the surface layers of internal organs. As these layers are within its imaging depth range, OCT can detect cancer at an early stage as well as precisely determine tumor margins. However, it is very challenging to apply this technique to internal organs because of stringent size and imaging time constraints. One promising approach is to use microelectromechanical systems (MEMS) scanning micromirrors. Several research groups have demonstrated actuation mechanisms to generate rotational scanning for micromirrors for endoscopic OCT. Among them, electrostatic micromirrors can be very fast and consume low power, but the angular scan range is limited and the required driving voltage is too high ( 100V) to be safe for patients. Electromagnetic micromirrors have also been used for OCT probes, but the assembly process is complicated and the potential electromagnetic interference caused by the use of permanent magnets is another concern. Another problem these mirrors share is that they all have a small fill factor (the ratio of the mirror area to the device area). For a given resolution, the required mirror area is fixed. Thus, a small fill factor leads to a large device, which in turn increases the imaging probe size. Electrothermal mirrors, on the other hand, can achieve a large scan range at low drive voltage, but most of them have large initial tilt angles and significant shift of rotation centers, causing serious optical alignment and coupling problems. Figure 1. Scanning electron micrograph of an electrothermal MEMS mirror. Chip size: 2mm 2mm.

Single-Crystal Silicon Based Electrothermal MEMS Mirrors for Biomedical Imaging Applications

A Large-Scanning-angle, Electrothermal SCS Micromirror for Biomedical Imaging

Endoscopic optical coherence tomographic imaging with a CMOS-MEMS micromirror

A SCS CMOS Micromirror for Optical Coherence Tomographic Imaging

Large-range large-aperture MEMS micromirrors for biomedical imaging applications

A Two-Axis Electrothermal Micromirror for Endoscopic Optical Coherence Tomography

Progress of MEMS Scanning Micromirrors for Optical Bio-Imaging

Mems Based Endoscopic Optical Coherence Tomography

MEMS micromirror integrated endoscopic probe for optical coherence tomography bioimaging

MEMS Scanning Micromirror for Optical Coherence Tomography.

A Two-Axis Electrothermal Micromirror For

Optical coherence tomography based on high-speed scanning MEMS mirror

Design and Fabrication of a 2-Axis Electrothermal MEMS Micro-Scanner for Optical Coherence Tomography

A Wide-Angle Immersed Mems Mirror And Its Application In Optical Coherence Tomography

Electrothermal Micromirror with Dual-Reflective Surfaces for Circumferential Scanning Endoscopic Imaging

Design of Optical Coherence Tomography Probe Using a 2-Axis MEMS Scanning Mirror

A 45°-tilted 2-axis scanning micromirror integrated on a silicon optical bench for 3D endoscopic optical imaging

Lvd Micromirror for Rapid Reference Scanning in Optical Coherence Tomography

Scanning Micromirror Platform Based on MEMS Technology for Medical Application

A Silicon Optical Bench-Based Forward-View Two-Axis Scanner for Microendoscopy Applications

Optical Micro-Endoscopes for 3D In-Vivo Imaging