Abstract:Capacitor voltage balancing is a critical issue for neutral-point-clamped-based converters, including the two/three-level dual-active-bridge dc–dc converters. The unbalanced capacitor voltage will increase the voltage stress on power devices and negatively affect the reliability of the converters. Two typical problems during the capacitor voltage balancing process should be solved, i.e., power fluctuation minimization and determination of the transformer current polarity. Accordingly, this article proposes a balancing control scheme based on the complementary switching-state (CSS) method. In the CSS method, the switching states, which are identified to be adverse for balancing, will be replaced by their corresponding CSSs to control the neutral-point current while keeping the voltage and current waveforms unchanged. By doing so, the power fluctuation and current overshoot during the balancing process can be significantly reduced. Moreover, since the dynamic voltage and current waveforms are identical to the steady-state waveforms, the transformer current polarity during the balancing process can be identified based on the steady-state power and current models. Therefore, the determination of the transformer current polarity can be simplified compared to the traditional balancing control scheme. Finally, experimental results are carried out to verify the performance of the proposed balancing control scheme.

Research on Three-phase Hybrid-clamped Five-level PWM Rectifier

A Modified DPWM with Neutral Point Voltage Balance Capability for Three-Phase Vienna Rectifiers

Research on three-phase PWM hybrid-clamped five-level AC-DC converter with high power factor

Control of PWM Rectifier under Unbalanced Input Voltages

Capacitor Voltage Balancing for Multi-Level Dual-Active-Bridge DC-DC Converters

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

A New Five-Level Hybrid-Clamped Converter with Reduced Number of Clamping Devices

Imbalance Mechanism and Balanced Control of Capacitor Voltage for a Hybrid Modular Multilevel Converter

Capacitor Voltage Balancing Control for a Novel 5-Level Dual Active Bridge Converter

Capacitor Voltage Balancing of a Five-Level ANPC Converter Using Phase-Shifted PWM

Capacitor voltage balancing of five-level ANPC converter based on zero-sequence voltage injection using PS-PWM

A novel three-phase seven-level active clamped converter using H-bridge as a level doubling network

Research on topology of hybrid diode-clamping multilevel voltage inverter

Topology and Control of a Five-Level Hybrid-Clamped Converter for Medium-Voltage High-Power Conversions

Capacitor Voltage Balancing Algorithm with Redundant Level Modulation for a Five Level Converter with Reduced Device Count

A Capacitor Voltage Balancing Strategy for a Five-Level Hybrid-Clamped Inverter

Research on Hybrid-Clamped Multilevel-Inverter Topologies.

Capacitor Voltage Balancing of a New Five-Level Hybrid-Clamped Inverter

A Generalized Carrier-Overlapped PWM Method for Neutral-Point-Clamped Multilevel Converters

The Topologies and Control of Hybrid-Clamped Four-Level and Five-Level Inverters

An Optimized Carrier-Based PWM Method and Voltage Balancing Control for Five-Level ANPC Converters