Abstract:Bridge vehicle load is an important parameter that is relevant to the construction and maintenance stages of a bridge. In recent years, a large number of orthotropic steel deck bridges have been built in China, and it is urgent to establish a fatigue load model that reflects the actual traffic conditions of the bridges. This study has investigated the variation of vehicles over time on four grades of road (expressway, first-class highway, second-class highway and urban main road) according to the weight-in-motion (WIM) data. Subsequently, the statistical model was established in terms of speed, axle weight, and gross weight of vehicle (GVW) acting on the four grades of road. Finally, a fatigue load model of vehicles on the four grades of road was established based on a two-stage method. The results show that (1) the speed of vehicle on the four grades of road obeys the unimodal distribution; (2) the GVW of two- and three-axle vehicles on the four grades of road belongs to the t-distribution and the log-normal distribution, respectively; (3) the GVW of four- and five-axle vehicles on expressways is a finite mixed distribution, whereas the GVW of four- and five-axle vehicles on the remain three grades of road obeys the log-logistic and log-normal distribution respectively; (4) the GVW of six- and above axle vehicles on expressways and second-class highways obeys a finite mixed distribution with two variables, whereas that on first-class and urban main roads obeys the log-normal distribution; (5) the axle weight of standard fatigue vehicles differs remarkably on different grades of roads, which is difficult to describe the fatigue damage in a uniform standard fatigue vehicle.

Analysis on Probabilistic Model of Vehicle Load Effect on Highway Bridge and Its Reliability

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Research on Probabilistic Model of Highway Bridge Vehicle Loads(1)——Non-controlling Area

Multiple-peaked probabilistic vehicle load model for highway bridge reliability assessment

Multiple-Peak Vehicle Load Model For Bridge Reliability Assessment

Research on Probabilistic Model of Highway Bridge Vehicle Loads(2)——Toll-by-weight Area and Overload Controlling Area

Dynamic Reliability of Continuous Rigid-Frame Bridges under Stochastic Moving Vehicle Loads

Evaluating Probabilistic Traffic Load Effects on Large Bridges Using Long-Term Traffic Monitoring Data

A Study on Assessment Method of Traffic Load Effect of Bridge in Service

Vibration-Induced Probabilistic Fatigue Life Assessment of A Suspension Bridge Carrying Both Railway and Highway Traffic

Lifetime fatigue reliability evaluation of short to medium span bridges under site-specific stochastic truck loading

Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application

Multi-parameter Dynamic Traffic Flow Simulation and Vehicle Load Effect Analysis based on Probability and Random Theory

Traffic Load Modeling Based on Structural Health Monitoring Data

Statistics and Probability Analysis of Vehicle Overloads on a Rigid Frame Bridge from Long-Term Monitored Strains

Vehicles load stochastic process model of highway bridges

Bridge Time-Variant Reliability Assessment Considering Resistance Deterioration and Load Change

Reliability-based vehicle weight limit determination for urban bridge network subjected to stochastic traffic flow considering vehicle-bridge coupling

Probability Model and Reliability Analysis of Cable Stress for Cable-Stayed Bridge

RELIABILITY-BASED ANALYSIS ON THE VEHICLE WEIGHT LIMIT OF HIGHWAY BRIDGES