Abstract:Firstly,the 3D finite element model of a large-span transmission tow er lines system w ith main tow er height of 375m and main span of 2 756m is established using softw are SAP2000,and is transformed to ABAQUS finite element model by the developed interface program SAP2ABAQUS. Then,the approach for achieving the loading process of static effect under the gravity action is given explicitly by using long-period explicit dynamic loading method. By the approach,the shape finding of cable and its initial stiffness are finished under the gravity action,w hich further realized that gravity analysis could be performed subsequently w ith dynamic loading excited by the subsequent earthquake. Besides,the dynamic characters of four types of model w ith different boundary conditions are analyzed and compared,and from the comparison of model component before and after the transformation and their corresponding modal analysis results, the transformation accuracy through program SAP2ABAQUS is verified. Further,the program MEMS_ b V2012. 5 is updated to MEMS_ b V2013. 5 and the multi-point earthquake motions of target field are simulated. At last,considering geometric large deformation and differential input,the developed subroutine given by ABAQUS main program is used to analyze the elastoplastic and collapse of tow er-lines system. The actual engineering analysis results show that:( 1) The developed interface program SAP2ABAQUS is further verified to have reliable accuracy and high efficiency transformation from the aspect of actual engineering.( 2) The developed subroutine is feasible and reliable for analyzing actual engineering.( 3) The static gravity loading process realized by the long-period dynamic loading method w hich is reasonable in theory and feasible in real,and overcome the difficulty that implicit static gravity mode loading cannot be performed subsequently w ith explicit dynamic analysis.( 4) From modal and theory analysis,it show s that the necessity and reliability of selecting the system of four tow ers w ith three lines as analysis object.( 5) The consistency of multi-point earthquake motion and differential input have the significant influence on occurrence and developing distribution of plastic hinges. So,it is very necessary to consider the multipoint earthquake motions as input w hile analyzing the elasto-plastic responses of the similar structural system.

Failure Modes and Their Numerical Descriptions of Grid Structures Subjected to Earthquake

Pattern Recognition of Dynamic Failure Mode of Grid Structure Using Fuzzy Clustering

STUDY ON TYPES AND CHARACTERS OF DYNAMICAL FAILURE FOR SINGLE LAYER LATTICED SHELLS

Fragility analysis and assessment of large-span beam string-structures

Analysis of dynamical failure of suspendome under typhoon load

A Backbone Grid Planning Method Against Disasters in Transmission Grid

Comparative analysis on earthquake action calculation methods of cable dome structures

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Impact of Characteristic Path Length on Cascading Failure of Power Grid

Analysis of Cascading Failure in Electric Grid Based on Power Flow Entropy

Analytical and Numerical Study of the Size Effect on the Failure Response of Hierarchical Structures

Series–Parallel System Analysis and Reliability Research of Grid Structures Considering Adaptive Dynamic Bounding Threshold

Mechanical Properties Analysis and Design Method for Grid Structures under Fire Conditions

Elasto-plasticity and Collapse Analysis for Large-span and High Structure(III)——Elasto-plastic and Collapse Analysis of Transmission-lines System under Multi-point Seismic Motions

3D NUMERICAL MODELING OF POSSIBLE FAILURE ZONE WITH UNDERGROUND EXCAVATION

Conditional Probability-Based System Reliability Analysis for Geotechnical Problems

Risk Assessment for Cascading Failures of Complex Power System

Validation of a numerical model based on dynamic centrifuge tests and studies on the earthquake damage mechanism of underground frame structures

Failure mode and characteristics study of complex slope blocks under strong earthquake

FAILURE MECHANISM AND ITS CONTROL OF BUILDING STRUCTURES UNDER EARTHQUAKES BASED ON STRUCTURAL SYSTEM CONCEPT

Failure Modes-Based Searching and Optimizing of Steel Reinforced Concrete Frame Structures