Abstract:The state the morphology of the surface of the aluminum electrode, the elemental composition of the surface layer before and after cathodic treatmentin the galvanostatic mode are investigated. It was found that in the range cathodic current densities less than 0.1 mA/cm2 on the aluminum cathode mainly adsorption of polymolybdate and polyphosphate molybdate ions occurs, accompanied by the formation in the adsorbed layer of polymer chains from molybdenum oxides of intermediate valence Mo (VI) → Mo (IV) → Mo (II) double oxides, aluminates, aluminum polyoxophosphate molybdates, providing free movement of alkali metal and hydrogen cations. According to the data of currentless chronopotentiometry secondaryionic mass-spectrometry and scanning electron microscopy, the formation of a layer of heteropolyoxophosphatemolybdates occurs already in the absence of current. The decisive role in the formation of the morphology modificating layer and its elemental composition is played by the introduction of phosphoric acid sodium molybdate solution. At 0.5 mA/cm2 and higher cathodic current densities, the process of hydrogen evolution predominantly occurs both by the reaction of the discharge of hydrogen ions and water molecules, and due to the chemical interaction of aluminum and the resulting alloy of aluminum with sodium with water molecules and phosphoric acid. This is indicated by alkalinization of the near-electrode layer of the solution. The rate of hydrogen and sodium intercalation ions into the structure of the polyoxophosphatemolybdate layer increases sharply with an increase in the current density to a value of 5... 10 mA/cm2, when a potential of –1.3 ... –3.0 V is established on the electrode. This is facilitated not only by the fibrous structure of the forming layer of aluminum and sodium polyheterooxophosphate-molybdates, but also the formation of protonated cations and anions of phosphoric acid in solution, which facilitate the interaction of chitosan with the surface of the electrode, due to the transition to the phosphate complex, and provide an enhancement of the film-forming effect and ordering of the structure of the modifying layer. This is indicated by a decrease in the angle of contact.

The Electrochemical Behavior of Anodic Oxide Film on High Purity Aluminum

Study on oxidation mechanism of aluminum surface under applied electric field

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Anodic behavior of Fe in acidic AlCl3-EMIC ionic liquid

Effect of Electrical Parameters on the Structure and Properties of Aluminum Foil Microarc Oxidation Film

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Influences of Zinc Oxide and an Organic Additive on the Electrochemical Behavior of Pure Aluminum in an Alkaline Solution

Anodic Film Growth on Al–Li–Cu Alloy AA2099-T8

Atomic Force Microscopy Study of the Initial Stages of Anodic Oxidation of Aluminum in Phosphoric Acid Solution

Performance of Anodic Films Formed on Lead Based-Rare Earth Alloys As Positive Grid

Corrosion and Anodic Behaviors of Pure Aluminum in a Novel Alkaline Electrolyte

Influence of CeO2 Nanoparticles on Structure and Properties of Anodic Oxide Film on 2024 Aluminum Alloy

Alkali assisted water treatment of aluminum promoting the growth of hydrated oxide film for energy conservation

Direct observation of the anodic film on a sputter-deposited amorphous Al-W alloy

Nanostructure Analysis of Anodic Films Formed on Aluminum-Focusing on the Effects of Electric Field Strength and Electrolyte Anions

Anodic Layer Growth on 1050 and 2024 Aluminium Alloys in Presence of Etidronic Acid : Changes in Morphology and Structure

Structural and Hydrophilic Properties of Nanoporous Aluminium Oxide Film as a Function of Voltage Anodization

Improving the Corrosion Behaviour of 6061 Aluminum Alloy by Controlled Anodic Formed Oxide Layer

Effect of voltage on structure and properties of 2024 aluminum alloy surface anodized aluminum oxide films

Electrochemical Modification of the Aluminum Surface by Cathodic Treatment in Chitosan-Containing Aqueous Phosphate-Molybdate Solutions