Analysis of Composition of Coking Wastewater Oxidized by O_3/UV and the Kinetics of the Key Component

陈祥佳,赵国保,韦朝海,蒋争明,刁春鹏,林冲,胡芸,任源,吴超飞

IF: 4.236

2012-01-01

Environmental Chemistry

Abstract:Since various residual inert components co-exist in coking tail wastewater,which still do harm to human beings and aquatic ecosystem even after biological and chemical selective degradation,the advanced treatment and purification is an urgent problem for the coking wastewater.This subject is preformed with the coking tail wastewater after A/O/O at O3/UV fluidized bed reactor.For comparing composition of coking tail wastewater,the oxidative ability of coking tail wastewater is evaluated by oxidation with O3/UV and potassium dichromate(K2Cr2O7).The influence of pH and initial COD concentration on O3/UV oxidation was studied and the dynamic statistical models for oxidation process of different compositions were established.The results indicated that,O3/UV shows stronger oxidability than potassium dichromate.The compositions oxidized by O3/UV include not only the COD component,but also ammonia and others components.The COD can reach the best removal rate at pH=10—11.With increase of COD concentration,the chemical reaction rate will increase correspondingly.The decline of COD concentration is consistent with a first-order kinetic model in the process of O3/UV catalytic oxidation of coking wastewater while the decline of NH+4-N concentration can be fit by zero-order kinetic model.Because of the existence of nitrogen-containing substrates such as SCN-and CN-,the NH+4-N concentration increases first and then decreases when the coking wastewater was oxidized by O3/UV.The time when ammonia nitrogen concentration reaches a maximum value is positively related to the number of nitrogen material.The overall results show that O3/UV catalytic oxidation fluidize bed reactor can be used as depth treatment technology for the coking tail wastewater,which efficiency rely on the sequence reduction activities of pollutant components,application of degradation kinetic model and mass transfer efficiency of fluidization.