Abstract:Spatially resolved spectroscopy provides a means for measuring the optical properties of biological tissues, based on analytical solutions to diffusion approximation for semi-infinite media under the normal illumination of an infinitely small light beam. The method is, however, prone to error in measurement because the actual boundary condition and light beam often deviate from that used in deriving the analytical solutions. It is therefore important to quantify the effect of different boundary conditions and light beams on spatially resolved diffuse reflectance in order to improve the measurement accuracy of the technique. This research was aimed at using finite element method (FEM) to model light propagation in turbid media, subjected to normal illumination by a continuous-wave beam of infinitely small or finite size. Three types of boundary conditions [i.e., partial current (PCBC), extrapolated (EBC), and zero (ZBC)] were evaluated and compared against Monte Carlo (MC) simulations, since MC could provide accurate fluence rate and diffuse reflectance. The effect of beam size was also investigated. Overall results showed that FEM provided results as accurate as those of the analytical method when an appropriate boundary condition was applied. ZBC did not give satisfactory results in most cases. FEM-PCBC yielded a better fluence rate at the boundary than did FEM-EBC, while they were almost identical in predicting diffuse reflectance. Results further showed that FEM coupled with EBC effectively simulated spatially resolved diffuse reflectance under the illumination of a finite size beam. A large beam introduced more error, especially within the region of illumination. Research also confirmed an earlier finding that a light beam of less than 1 mm diameter should be used for estimation of optical parameters. FEM is effective for modeling light propagation in biological tissues and can be used for improving the optical property measurement by the spatially resolved technique. (C) 2015 Optical Society of America

Validation of Diffusion Equation Photon Transport Model in Optical Tomography Using MC Method

A higher order diffusion model for three-dimensional photon migration and image reconstruction in optical tomography.

Finite element modeling of light propagation in turbid media under illumination of a continuous-wave beam

A Sequential Method for Measuring the Optical Properties of Two-Layer Media with Spatially-Resolved Diffuse Reflectance: Simulation Study

A study on numerical simulation of image reconstruction in optical computer tomography

Visual Simulation of Diffuse Light

The Forward and Inverse Models in Time-Resolved Optical Tomography Imaging and Their Finite-Element Method Solutions

Monte Carlo Simulation of Photon Propagation in Tissues

Stochastic Gauss-Newton method for estimating absorption and scattering in optical tomography with the Monte Carlo method for light transport

Meshfree strategy for diffuse optical tomography image reconstruction

An improved Monte Carlo diffusion hybrid model for light reflectance by turbid media.

Numerical modelling and image reconstruction in diffuse optical tomography

Finite element model for the coupled radiative transfer equation and diffusion approximation

Finding The Most Probable Diffuse Path Of Photons In Tissue By Monte Carlo Method

MODELING AND VALIDATION OF LIGHT PROPAGATION IN FREE-SPACE FOR NON-CONTACT NEAR-INFRARED FLUORESCENT TOMOGRAPHY

Forward Problem of Fluorescent Molecular Tomography Based on Monte Carlo

A finite element approach for modeling photon transport in tissue

Frequency Domain Optical Tomography in Human Tissue

In Vivo Simulation Environment for Fluorescence Molecular Tomography Using Monte Carlo Method

Imaging Based Tissue Optics: Parallel Monte Carlo Modeling and Phantom Measurements

Comparison of Diffusion Approximation and Higher Order Diffusion Equations for Optical Tomography of Osteoarthritis