Abstract:As a transmission part for industrial application the manufacture of spiral bevel gear is particularly important. The present machining methods for manufacturing spiral bevel gears, including the so called five-cut method and completing method, have drawbacks such as low processing efficiency, requiring complex calculations and high requirements on the machine-tool performance, respectively. To solve the above problems, an equivalent completing method is proposed to process spiral bevel gear in this paper. Firstly the machine setting parameters by completing were translated from the Cradle-type hypoid generator to Cartesian-type hypoid generator and the workpiece is swing during process. CNC motion axes expression of Cartesian-type hypoid generator were expressed as sixth-order polynomial, the influences of coefficient on the tooth surface topology were researched. Then the method to machine spiral bevel gear was put forward by reducing the swing axis of workpiece, obviously a deviation of tooth surface was caused between theoretical and axis-reduced. As a response, a flank correction model was established and the other polynomial coefficients were adjusted to eliminate the deviation. Finally simulation and cutting experiment were carried out by a numerical example. The experimental results show that the proposed method is effective and feasible. The method proposed in this paper overcome and enrich the disadvantages of existing manufacture methods of spiral bevel gear.

An Innovative Modeling Method of Spiral Bevel Gears Base on UG

Research on Simulating and Modeling Method for Spiral Bevel Gears with Actively Controllable Contact Patterns

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Simulation and optimization of computer numerical control-milling model for machining a spiral bevel gear with new tooth flank

Mesh Contact Region Controllable Modeling of Mesh Surface on Spiral Bevel Gears

An adaptive geometric meshing theory for the face-milled generated spiral bevel gears

A method to manufacture spiral bevel gears by equivalent completing

Mathematical model of spiral bevel and hypoid gears manufactured by the modified roll method

Geometric Modeling of Spiral Bevel Gear under Virtual Reality

Research on Method of Solid Modeling and Tooth Surface Shape Evaluating for Spiral Bevel Gear

Research on Parameterized Designing of Involute Gears and NC Machining Simulation based on UG

Mathematical Modeling and Machining of the Internal Double-Arc Spiral Bevel Gear by Finger Milling Cutters for the Nutation Drive Mechanism

Build a Model of Asymmetric Involute Gear Based on UG

Uniform Modeling of Tooth Surface of Spiral Bevel Gear Machined by Different Process

A Study of Addendum Rotational Indexing-Chamfering Technology for Spiral Bevel Gears

Influence of cut parameters on mesh performance of spiral bevel gear by duplex spread blade method

Research on CAM of Generating Manufacturing Spiral Bevel Gear Based on Machining Center

Theory and experimental research on spiral bevel gear by double-side milling method

Mathematical modelling and simulation machining of CNC milling of double-arc spiral internal bevel gear with nutation drive

Remanufacturing the Pinion: An Application of a New Design Method for Spiral Bevel Gears

Tool Path Active Design for Tooth Modification of Face-Hobbed Spiral Bevel Gears