Abstract:We investigated the cavitating flows around different axisymmetric bodies based on experiments and numerical simulation. In the numerical simulation, the multiphase Reynolds averaged Navier Stokes equations (RANS) were solved via the commercial computational fluid dynamics code CFX. The modified k - ω SST turbulence model was used along with the transport equation-based cavitation model. In the experiments, a high-speed video technique was used to observe the unsteady cavitating flow patterns, and the dynamic force measurement system was used to measure the hydrodynamics of the axisymmetric bodies under different cavitation conditions. Results are shown for the hemisphere bodies, conical bodies and blunt bodies. Reasonable agreements were obtained between the computational and experimental results. The results show that for the hemispherical body, the cavity consists of quasi-steady transparent region and unsteady foggy water-vapor mixture region, which contains small-scale vortices and is dominated by bubble clusters, causing irregular disturbances at the cavity interfaces. The curvature at the front of the conical body is larger, resulting in that the flow separates at the shoulder of the axisymmetric body. The cavity stretches downstream and reaches to a fixed cavity length and shape. For blunt bodies, the incipient cavitation number is larger than that for the hemispherical body. A large cloud cavity is formed at the shoulder of the blunt body in the cores of vortices in high shear separation regions and the re-entrant jet does not significantly interact with the cavity interface when it moves upstream. As to the dynamic characteristics of unsteady cavitating flows around the axisymmetric bodies, the pulsation frequency for the hemispherical body is larger than that for the blunt body. For the hemispherical body, the pulsation is mainly caused by the high-frequency, small-scale shedding at the rear end of the cavity, while for the blunt body, the main factor for the pulsation frequency is the periodically shedding of large-scale vortex cavities.

Experimental Study on Cavitating Flows Around an Axisymmetric Body with a Cavitator

Experimental and numerical research on cavitating flows around axisymmetric bodies

Experimental Study On Cavitation Over A Flat Hydrofoil With Obstacle

Design Method of Water Jet Pump Towards High Cavitation Performances

Experimental Measurement of Vortex Cavitation Around a Suction Pipe Inlet

Experimental and Numerical Studies on the Cavitation over Flat Hydrofoils with and Without Obstacle

A Comparative Assessment of Various Cavitator Shapes for High-speed Supercavitating Torpedoes: Geometry, Flow-physics and Drag Considerations

Study On Vortex Generators For Control Of Attached Cavitation

Dynamics of the supercavitating hydrofoil with cavitator in steady flow field

Numerical Study of Porous Tip Treatment in Suppressing Tip Clearance Vortices in Cavitating Flow

Free surface and near-wall effects on the cloud cavitating flow over an axisymmetric projectile

Experiment Investigation of the Tip Vortex Cavitation Around a Pitching Hydrofoil

Evaluation of the Cavitation Fluid Characteristics of the Bullet across the Medium into the Water at Different Velocities

Numerical investigation of cavitation vortex dynamics in different cavitation patterns coupled implicit large eddy simulation and boundary data immersion method

Non-Equilibrium Molecular Dynamics Simulation for Mechanism and Drag Reduction of Underwater Supercavitation in Open System

Experimental and numerical analysis of the physical characteristics of natural and ventilated supercavitating flows

Numerical Simulation of Cavitating Flow Around a Slender Body with Slip Boundary Condition

Numerical and Experimental Study on Unsteady Shedding of Partial Cavitation

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Water entry experiment of a cylindrical vehicle with disc cavitator

Experimental and numerical study on cavitation pulsating pressure of water-jet propulsion axial-flow pump