Abstract:When a fluid flows over a solid surface, viscous effects generate shear stress, or skin friction, on the surface. Knowledge of such wall shear stress is essential for understanding the dynamics of fluid flow, and its measurement holds great importance for investigating and controlling wall-bound turbulence and flow separation in aerodynamic control. MEMS play an important role for studying gaseous or liquid fluid flows experimentally due to device dimensions on the μm-scale. For aerodynamic applications, the realization of sensor-actuator networks on airfoils is a challenging task to improve the lift properties of aircrafts by the precise detection and the systematic manipulation of the transition point from laminar to turbulent airflow conditions. Based on the well-established principle of thermal anemometry, an array of thermal sensors on a flexible polyimide substrate was developed. The first application of this technology has produced a flexible shear-stress sensor array. Apparently, this technology can be applied to produce a flexible skin with other sensing elements, such as temperature or pressure sensors. In addition, two signal processing methods of the sensor array signals have been proposed to detect the location of the flow separation point on curved surface for the positive flow control purpose. The computation parameter is based on thermal method measurement the surface local shear stress. The flexible sensor array has also been used to detect instantaneous separation region on the surface of a NACA0012 typical aerofoil. In a first step, CFD (Computational Fluid Dynamics) simulations were performed to estimate the corresponding shear stress distribution within the NACA0012 typical aerofoil at flow conditions is the velocity 40m/s and AOA 16° .To illustration the method, the low speed wind tunnel testing data was used to analysis the accuracy and effectively of the method presented in this paper, which can demonstration that the method provides an applicable, efficient tool for the flow separation analysis in the it's location decision aspect. Copyright © 2007 by ASME.

A Criterion for 2-D Boundary Layer Separation Point Based on Continuous Wavelet Transform

A Wavelet Transform to Detect the Fluid Separation with Flexible Micro-sensor Array

Detecting Boundary-Layer Separation Point with a Micro Shear Stress Sensor Array

Detection of the boundary-layer separation point based on the flexible sensor arrays

High Sensitive Flexible Hot-Film Sensor for Measurement of Unsteady Boundary Layer Flow

Experimental Investigation on the Position Detection of Boundary-layer Separation Based on Flexible Sensor Array

Real-time Detection Method of Boundary-layer Separation Point

Investigation of detecting fluid separation point by flexible micro-shear-stress-sensor array

Design and Test of the Fluid Separation Detection System

Sensing flow separation on a typical aerofoil by MEMS flexible thermal sensor array

METHOD AND SIMULATION OF THE USE OF MICRO SHEAR STRESS SENSOR ARRAY IN DETECTING BOUNDARY-LAYER SEPARATION POINT

Micro Pressure Sensor Array Used to Detect Boundary-Layer Separation Point

Detection Method of Boundary-Layer Separation Point Based on Micro Pressure Sensor Array

Continuous Wavelet Transform of Turbulent Boundary Layer Flow

The Fabrication and Integration of a Novel Shear Stress Sensor Array and Its Wind Tunnel Test

High Sensitive Micro Flexible Thermal Sensor for Flow Separation Measurements on Airfoil

A Flexible Hot-Film Shear Stress Sensor Array and Its Application to Airfoil Separation Detection

Analysis of Flow Transition and Separation on Oscillating Airfoil by Pressure Signature

On the Accurate Measurement Method of Standing Cross-flow for Three-dimensional Laminar Airfoil Boundary Layer

Wavelet Auto-Correlated Identification of Multi-Scale Coherent Structures in Turbulent Boundary Layer

Flexible Skin for Measurement of Boundary Layer State and Flight Attitude Identification on UAV