Abstract:In order to discuss the application and mode of the forced modulation function in a sensor, the optical fibre emphasis function was established by referring to the geometric method, the tilt factor and the shape factor of the reflecting surface. These were introduced for the first time, and the corresponding mathematical model was established. The method of numerical simulation is systematically studied and multimode optical fibre parameters (including optical fibre of axial spacing, optical fibre core diameter and numerical aperture) are adopted. The reflective surface inclination and shape factors on the RIM–FOS intensity modulation characteristics are studied according to the obtained light quasi-Gaussian distribution model, establishing a general three-intensity modulation function of fibre optic sensor. The results show that the intensity modulation characteristic of specular reflection is obviously better than that of the diffuse reflection surface, and the peak value of the modulation function is five times that of diffuse reflection. The intensity modulation characteristic decreases with increase in the roughness of the reflection surface. The system can not only complete the RIM–FOS characteristic simulation and characteristic testing functions, but can also start-up the test and not be affected by the ambient light interference and power fluctuation of the light source. The test stability is good with high repeatability.

Collimated beam fiber optic position sensor: effects of sample rotations on modulation functions

Influence of Imperfect Faraday Rotation Mirror on All-Fiber Optic Current Sensor.

Research on the Effect on Intensity Modulation Caused by Perpendicularity Between the Axes of Fiber Pair and Reflector

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

Fiber Optic Displacement Sensors Based on the Principle of Collimated Beam Reflective Intensity Modulation

Effects of Fibre Geometry on the Modulation Function of a Reflective Intensity Modulation Sensor

Influence of Fixing Error on the Intensity Modulation of a Reflective Fiber Optic Displacement Sensor

Fiber Deflection Probing Method Based on Micro Focal-Length Collimation

Multimode Excitation-Induced Phase Shifts in Intrinsic Fabry-Perot Interferometric Fiber Sensor Spectra

Reflection Properties of Guided Wave in Fiber Taper Used for Scanning Near-Field Optical Microscopy

Measurement of Rotation Axis Transverse Displacements Based on Diffuse Reflective Intensity Modulated Optical Fiber Sensor

Study on Fiber Position Sensor Based on Wavelength Encoding Plane Variable-Line-space Gratings

Study of polarization-insensitive fiber optic michelson interferometric sensors

Light Beam Coupling Efficiency of Thickness Measurement System Based on Low-Coherent Fiber-Optic Interferometry

Birefringent Wedges Effects on Cross-Correlation Polarization Demodulation in Optical Fiber Fabry-Pérot Sensors

Precision analysis on white-light fiber measurement system

Application of Forced Modulation Function Mathematical Model in the Characteristic Research of Reflective Intensity Fibre Sensors

Model Analysis of Single-Mode Optical Fiber Extrinsic Fabry-Perot Interferometric Sensors

Modeling of Grating/moiré Based Micro Motion Sensor

An Optical Fiber Lateral Displacement Measurement Method and Experiments Based on Reflective Grating Panel.

Optical fiber sensor based on beam orbital angular momentum