Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Vertical Elastic Stability Analysis of Main Girders in Self-Anchored Suspension Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Influence Factor Analysis for Static Performance of Self-Anchored Suspension Bridge

Research of the Practical Calculation Method and Procedure of Long Self-Anchored Suspension Bridge

Static characteristics of self-anchored suspension bridge with super wide concrete box girder under vehicle loads

Mechanical Analysis for Anchorage Zone Connecting Main Cable and Main Girger of Self-Anchored Suspension Bridge

Mechanical Analysis on Anchorage Structure of Self-Anchored Suspension Bridge

Nonlinear analysis of self-anchored cable-stayed suspension bridge

Study of the material parameters of self-anchored suspension bridges

Initial Equilibrium State Analysis for Concrete Self-Anchored Suspension Bridge under Dead Load

Determination of Reasonable Finished State of Self-Anchored Suspension Bridges

Mechanical analysis for long-span self-anchored suspension bridges

Experimental study on stability of orthotropic steel box girder of self-anchored suspension cable-stayed bridge

Analysis of Stiffening Girder Erection Scheme of Single Tower and Single Span Asymmetric Suspension Bridge

Equivalent-Beam Theory of the Self-Anchored Suspension Bridge

Ultimate Bearing Capacity Analysis of Self-Anchored Suspension Bridge with Steel Box Girders Considering Local Buckling

Internal force calculation of long span suspension bridge under vertical load based on elastic foundation beam algorithm

Practical Calculation Method of Rational Completion Status of Self-anchored Suspension Bridge