Abstract:Aiming at the problems of small good workspace, many singular configurations, and limited carrying capacity of non-redundant parallel mechanisms, a full-redundant drive parallel mechanism is designed and developed, and its performance evaluation, good workspace identification, and scale optimization design are studied. First, the kinematics analysis of the planar 6R parallel mechanism is completed. Then, the motion/force transmission performance evaluation index of the mechanism is established, and the singularity analysis of the mechanism is completed. Based on this, the fully redundant driving mode of the mechanism is determined, and the good transmission workspace of the mechanism in this mode is identified. Then, the mapping relationship between the performance and scale of the mechanism is established by using the space model theory, and the scale optimization of the mechanism is completed. Finally, the robot prototype is made according to the optimal scale, and the performance verification is carried out based on the research of dynamics and control strategy. The results show that the fully redundant actuation parallel mechanism obtained by design optimization has high precision and large bearing capacity. The position repeatability and position accuracy are 0.053 mm and 0.635 mm, respectively, and the load weight ratio can reach 15.83%. The research results of this paper complement and improve the performance evaluation and scale optimization system of redundantly actuated parallel mechanisms.

Study on Elimination Singularities of Parallel Mechanism by Actuation Redundancy

Theory of Singularity Elimination by Redundant Actuation for Parallel Mechanism

Comparative Study on Singularities of Planar Parallel Mechanisms with and without Redundant Actuations

Actuator Singularity Analysis of Planar 3-DOF Redundant Parallel Mechanisms

Singularity Analysis and Dexterity Performance on a Novel Parallel Mechanism with Kinematic Redundancy

Analysis and Control of Redundant Parallel Manipulators.

Kinematics Analysis and Singularity Avoidance of a Parallel Mechanism with Kinematic Redundancy

Singularity analysis of a kinematically redundant (6+2)-DOF parallel mechanism for general configurations

Study on Fault Tolerance and Fault Rectification Strategy and Approach for Singularities of a 4-DOF Spatial Parallel Mechanism

Singularity analysis of redundant parallel manipulators

On Singularity of a Planar Parallel Manipulator with and without Actuation Redundancy

Distribution Of Singularity And Optimal Control Of Redundant Parallel Manipulators

Optimum Seeking of Redundant Actuators for M-RCM 3-UPU Parallel Mechanism

Workspace and Singularity Analysis of a 3-DOF Planar Parallel Manipulator with Actuation Redundancy

On Singularity and Redundancy of Parallel Manipulators

Study On The Kinematics Of A New Redundant Actuated Pkms

Synthesis of Branched Chains with Actuation Redundancy for Eliminating Interior Singularities of 3t1r Parallel Mechanisms

Singularity Analysis on a Special Class of Cable-Suspended Parallel Mechanisms with Pairwise Cable Arrangement and Actuation Redundancy

Kinematic Analysis of a Redundant Actuated Five Degrees of Freedom Parallel Mechanism.

Performance evaluation and dimensional optimization design of planar 6R redundant actuation parallel mechanism

Singularity Analysis of Actuation Coordination and New Indices for Optimal Design of Redundantly Actuated Parallel Manipulators