Abstract:Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.

Length Amending of Straddle Suspender Cable in Main Cable Clip

A new catenary cable element and its application

Theoretical Analysis and Experimental Study on Sensitivity of Element-Length Error in Cable-Strut Tensile Structures

Sensitivity analysis on responses of adaptive cable-strut tensile structure with length changeable elements

A New Catenary Cable Element

A Kind of New Nonlinear Cable Element Considering the Influence of Initial Sag

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

Numerical Analysis of the Pretension Deviations of a Novel Crescent-Shaped Tensile Canopy Structural System

Analysis method of cable's prestressing force correction construction for prestressed space structures

Two-node curved cable element for nonlinear analysis

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

THE FINITE PARTICLE METHOD FOR ANALYSING CABLE SLIDING IN CABLE-STRUT STRUCTURES

Member Length Error Effect on Cable-Strut Tensile Structure

Analysis of Cable under Dynamic Contact and Large Deformation

A semi-analytical formulation for suspended cables with singularity method

Discrete analytical model for lateral mechanical behavior of cable-saddle system in suspension bridges

Analysis and a Simplified Model of the Cable of a Large-Scale Flexible Parallel Manipulator for a Large Radio Telescope

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Numerical Analysis and Experimental Research on the Element-Length Error Sensitivity of the Cable-Bar Tensile Structure

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

A general framework for sliding cable analysis with elastic catenary equation