Abstract:This study investigated the rigidity and contact state of joint structures that influenced the rotor dynamic characteristics and imbalance response, and the curve for variable structure parameters and the external load. The consideration of rotor joint structures dynamics design was also discussed. The finite-element models were established by using 3D solid elements and surface-to-surface nonlinear contact elements between the interfaces for numerical analysis. The rotor dynamic characteristics were affected by the rigidity of joint structures, and the rotor imbalance response was affected by the contact state of the interfaces. The experimentation for measuring the static rigidity and dynamic contact state of bolted joints with different experimental cycles were performed. Both numerical simulation and experimental results showed that: Firstly, the stiffness of joint structures was not constant. There was a critical load Fcr, when the external load was less than Fcr, the stiffness of joint structures was K1; when the external load was more than Fcr, the bend stiffness of joint structures would drop to K2. The critical load Fcr was influenced by the length of interfaces and preload. Secondly, the contact state of joint structure interfaces varied after a long time of operating with alternating loads. The rotor imbalance was increased by fatigue damage accumulation and irreversible deformation. The study results show that the rigidity and contact state of joint structures vary with external loads and geometry structures, and would affect the rotor system operating. It is advisable to consider the influence of the position, structural parameter and external load of the rotor joint structures on aero-engine structure dynamics design.

Dynamic Design Method of Spline Joint Structure for Rotor System

Bending Stiffness And Dynamic Characteristics Of A Rotor With Spline Joints

Experimental Study on the Dynamic Characteristics of Spline Joint in Rotor System

Studies on dynamic characteristics of the joint in the aero-engine rotor system

Dynamics Design of the Aero-Engine Rotor Joint Structures Based on Experimental and Numerical Study

Study on the Stiffness Loss and Its Affecting Factors of the Spline Joint Used in Rotor Systems

Robust Design Method for Dynamics of High-Speed Rotor System with Interface

Studies On Dynamical State Stability Of The Aero-Engine Rotor Joint Structures

Dynamic modeling and analysis of the spline joint-flexible coupling-rotor system with misalignment

Dynamic Characteristics Analysis of a Rod Fastening Rotor System Considering Contact Roughness

Dynamic characteristics of rotor system with parallel and angular misaligned involute spline coupling

Stability Analysis of Spline Connected Rotor System

Dynamic Response of Double-disk Rotor with Squeezed Oil-film Dampers and Optimization of Its Supports

Dynamic Behavior of Twin-Spool Rotor-Bearing System with Pedestal Looseness and Rub Impact

Dynamic Design of the High-Speed Rotor System Considering the Distribution of Strain Energy

On improved calculation of transient dynamic response of rotor-stator system

Analytical modeling of the lateral stiffness of a spline coupling considering teeth engagement and influence on rotor dynamics

Analytical Modeling Method of Dynamics for the Spindle Rotor System

Simulation and Experimental Study on Impact Dynamic Characteristics of the Spline Rotor System

Dynamic Investigation of Aeroengine High Pressure Rotor System Considering Assembly Characteristics of Bolted Joints

The Study On Spline Coupling Dynamic Coefficients And Its Impact On Rotor Stability