Abstract:Intrinsically self-stabilized nanoparticles of a copolymer from 4-sulfonic diphenylamine (SD) and pyrrole (PY) were facilely synthesized in HCl solution at 10 degrees C by a chemically oxidative polymerization. The critical reaction parameters such as SD/PY ratio, polymerization time, and oxidant species were studied to significantly optimize the polymerization yield, size, conductivity, and solubility of the final copolymer particles. The molecular structure, size, size distribution, and morphology of the particles were analyzed by IR spectroscopy, laser particle-size analysis (LPA), atomic force microscopy, and transmission electron microscopy (TEM). It was found that the polymerization yield of the SD/PY (50/50) copolymers increased dramatically in the initial 2 h of polymerization and then slowly enlarged in the subsequent 22 h. However, the copolymerization yield for the polymerization time of 24 h exhibited a nonlinear dependence on the SD/PY molar ratio, i.e., a maximum at 10/90 and a minimum at 80/20. The number-average diameter, Dn, of the copolymer particles strongly depended on the SD/PY ratio, decreasing rapidly from 6402 to 291 nm as the SD/PY molar ratio changed from 30/70 to 50/50, whereas the polydispersity index, PDI = Dw/Dn (where Dw is the weight-average diameter), surprisingly maintained very small values, decreasing slightly from 1.21 to 1.08. The SD/PY (80/20) copolymer particles prepared with (NH4)2S2O8 as the oxidant had the smallest size of ca. 10 nm by TEM and the lowest Dw/Dn value of 1.03 by LPA, whereas the copolymer particles prepared with FeCl3 as the oxidant exhibited the second smallest size of ca. 20 nm by TEM and the highest conductivity. The conductivity of the SD/PY (50/50) copolymers rose first and then decreased with increasing polymerization time from 10 min to 24 h, exhibiting a maximum (0.217 S/cm) at 12 h. It is of interest that the copolymer particles with SD/PY molar ratios in the range between 50/50 and 80/20 surprisingly exhibited the smallest size, the narrowest size distribution, and the highest conductivity at the same time. In particular, the copolymer nanoparticles exhibited high purity, clean surfaces, good self-stability, high conductivity, and strong chemoresistance that were very important to nanomaterial processibility and application. The obtained copolymers were partially soluble in concentrated H2SO4, demonstrating a new direction for synthesizing a soluble pyrrole copolymer.

Synthesis And Heavy-Metal-Ion Sorption Of Pure Sulfophenylenediamine Copolymer Nanoparticles With Intrinsic Conductivity And Stability

Controllable synthesis and characterization of poly(aniline‐co‐pyrrole) using anionic spherical polyelectrolyte brushes as dopant and template

Synthesis and strong heavy-metal ion sorption of copolymer microparticles from phenylenediamine and its sulfonate

Facile Synthesis and Optimization of Conductive Copolymer Nanoparticles and Nanocomposite Films from Aniline with Sulfodiphenylamine.

Self-Stabilized Nanoparticles of Intrinsically Conducting Copolymers from 5-Sulfonic-2-anisidine

Facile Synthesis and Highly Reactive Silver Ion Adsorption of Novel Microparticles of Sulfodiphenylamine and Diaminonaphthalene Copolymers

Facile Synthesis of Polysulfoaminoanthraquinone Nanosorbents for Rapid Removal and Ultrasensitive Fluorescent Detection of Heavy Metal Ions

Powerful Reactive Sorption of Silver(I) and Mercury(Ii) Onto Poly(O-Phenylenediamine) Microparticles

Improved Conductivity of Polysaccharide-Co-Polyacrylate/Polyaniline Conducting Hydrogels

Strong adsorbability of mercury ions on aniline/sulfoanisidine copolymer nanosorbents.

Facile Synthesis and Characterization of the Copolymers and Their Pure Nanoparticles from Aniline with 4-Sulfonic Diphenylamine

Efficient Synthesis of Intrinsically Conducting Polypyrrole Nanoparticles Containing Hydroxy Sulfoaniline As Key Self-Stabilized Units

Facile Preparation and Characterization of Copolymer Nanoparticles from Pyrrole and Aniline-2-sulfonic Acid

Synthesis of Semiconducting Polymer Microparticles As Solid Ionophore with Abundant Complexing Sites for Long-Life Pb(II) Sensors.

Thiol Functionalized Polymer Submicron Particles Prepared by Soap‐free Emulsion Polymerization and Their Adsorption of Lead Ions in Water

The Synthesis Of Polydiaminonaphthalene And Its Highly Reactive Adsorption For Heavy Metal Ions

Functional Core/shell PMMA/P(MMA‐co‐PDSECAE)‐SH Particles with Thiol Groups in the Shell and Their Adsorption of Heavy Metal Ions

Synthesis of poly(1,5-diaminonaphthalene) microparticles with abundant amino and imino groups as strong adsorbers for heavy metal ions

Selective Adsorption Behavior of Sulfuric Acid Oxidized and Doped Conjugated Microporous Poly(aniline)s Toward Lead Ions in an Aqueous Environment.

Redox sorption and recovery of silver ions as silver nanocrystals on poly(aniline-co-5-sulfo-2-anisidine) nanosorbents.

Facile synthesis and intrinsic conductivity of novel pyrrole copolymer nanoparticles with inherent self-stability