Abstract:The High Intensity Heavy Ion Accelerator Facility (HIAF) is a new engineering project proposed by Institute of Modern Physics (IMP) of China. Various types of superconducting wires with the matrix of CuNi alloy for HIAF project were successfully developed by WST. NbTi/Cu5Ni superconducting wires with filaments number of 10800, 12960, 15984, 23760, 36720 and 44064 were designed and fabricated by a double stacking method. In this study, the microstructure and influence of a heat treatment on the critical current density, hysteresis loss and number of breaks of NbTi/Cu5Ni superconducting wire are investigated. It is demonstrated that when the number of heat treatments increases from 3 to 5, the critical current density increases from 2324 to 2699 A/mm 2 at 5T&4.2K for a 10800-filament wire. However, the number of breaks per one billet increases from 0 to 3. The maximum and minimum piece length is 3500 and 1000 m, respectively. The Nb barrier fracture results in the formation of the Ti-Cu compound between NbTi filaments and Copper during intermediate heat treatment. By reducing the Cu/Sc of sub-elements and improving the Cu shell thickness of the final billet, the deformation of outer filament is relatively favorable, which can enhance the critical current density and reduce hysteresis loss. The critical current density of six designed wires is between 2600 and 2700 A/mm 2 and `n' value is between 35 and 48 at 5T&4.2K, indicating a high filament quality and that no filament breakage occurs in the wire. The Cu5Ni alloy is regarded as the inter-filament matrix to reduce inter-filament coupling currents loss. When the filament number increases from 10800 to 44064 and the diameter of NbTi filament reduces from 4.5 to 2.5 μm, the hysteresis losses reduce from 38.5 to 26.2 mJ/cm 3 at ±3T. The average piece length of six designed wires is more than 2000 m, revealing the ability of mass production for WST. After 5 years investigations WST have developed several designs and the fabrication technology of this type of wire and can completely satisfy the requirements of HIAF magnets.

Microstructure and Properties of NbTi Superconducting Composite Wire for ITER

Study on Fabrication Process of NbTi/Cu Superconducting Wires for ITER

Study on the Microstructure of High Magnetic Field (≥ 9 T) NbTi Superconducting Wire

Magnetization Study of Iter-Type Internal-Sn Nb3sn Superconducting Wire

Development of multifilamentary niobium–titanium and niobium–tin strands for the International Thermonuclear Experimental Reactor project

Critical currents and pinning mechanism of superconducting Nb-50% wt Ti Alloys

Heat Treatment and Structure Optimizations of Internal Tin Nb3Sn Superconducting Strands in WST

Optimization of Bronze Processed ${\hbox {nb}}_{3}{\hbox {sn}}$ Strand for ITER at WST

An Investigation Into The Heat Treatment Tolerance Of Wst Nb3sn Strands Produced For Massive Fusion Coils

Effect of New Heat Treatment on Microstructure and Critical Current Density of NbTi Superconducting Wire

Effect of Preheat Treatment on the Critical Current Density in Nb46. 5Ti/Cu Composites

NbTi superconductors with variable compositions produced by diffusion reaction of niobium and titanium sheets

Study on High JC and Low AC Loss NbTi/Cu5Ni Superconducting Wire for HIAF Magnets in WST

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Study on the property and microstructure of NbTiTa superconducting wire

Microstructure of Surface and Subsurface Layers of a Ni-Ti Shape Memory Microwire.

NbTi SUPERCONDUCTOR PRODUCED BY USING INTERDIFFUSION BETWEEN NIOBIUM AND TITANIUM SHEETS

Performance and Microstructure of Bi-2212 Wire under Different OverPressures Heat-treatment

Microstructure Evolution of Powder in Tube Nb3al Wires During Rapid Heating Process and Properties of the Transformed Superconducting Wires

THE IMPROVEMENT OF FABRICATION PROCESS OF NbTi/Cu SUPERCONDUCTING WIRES FOR ITER PROJECT

Investigation Of Iter Use Internal-Sn Nb3sn Superconducting Wire Through Irreversibility Temperature Measurement