Abstract:In this paper, we report the development of an intensity modulated fiber optic sensor for angular displacement measurement. This sensor was designed to present high sensitivity, linear response, wide bandwidth and, furthermore, to be simple and low cost. The sensor comprises two optical fibers, a positive lens, a reflective surface, an optical source, and a photodetector. A mathematical model was developed to determine and simulate the static characteristic curve of the sensor and to compare different sensor configurations regarding the core radii of the optical fibers. The simulation results showed that the sensor configurations tested are highly sensitive to small angle variation (in the range of microradians) with nonlinearity less than or equal to 1\%. The normalized sensitivity ranges from $(0.25\times V_{\rm max})$ to $(2.40\times V_{\rm max})$ mV/$\mu$rad (where $V_{\rm max}$ is the peak voltage of the static characteristic curve) and the linear range, from 194 to 1840 $\mu$rad. The unnormalized sensitivity for a reflective surface with reflectivity of 100\% was measured as 7.7 mV/$\mu$rad. The simulations were compared with experimental results to validate the mathematical model and to define the most suitable configuration for ultrasonic detection. The sensor was tested on the characterization of a piezoelectric transducer and as part of a laser ultrasonics setup. The velocity of the longitudinal, shear, and surface waves were measured on aluminum samples as 6.43 mm/$\mu$s, 3.17 mm/$\mu$s, 2.96 mm/$\mu$s, respectively, with an error smaller than 1.3\%. The sensor proved to be suitable to detect ultrasonic waves and to perform time-of-flight measurements and nondestructive inspection, being an alternative to the piezoelectric or the interferometric detectors.

Doppler Effect-Based Fiber-Optic Sensor and Its Application in Ultrasonic Detection

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

A Fiber Optic Doppler Sensor and Its Application in Debonding Detection for Composite Structures.

Sensing Properties of Optical Fiber Sensor to Ultrasonic Guided Waves

A Review of Recent Developed and Applications of Plastic Fiber Optic Displacement Sensors

Fiber optic Fabry–Perot sensor that can amplify ultrasonic wave for an enhanced partial discharge detection

High-sensitivity Fiber Optic Acoustic Sensors

High-sensitivity fiber-optic low-frequency acoustic detector based on cross-correlation demodulation

Directional Sensitivity of a MEMS-Based Fiber-Optic Extrinsic Fabry⁻Perot Ultrasonic Sensor for Partial Discharge Detection

Fiber Optic Fabry-Perot Ultrasonic Sensor for Solid-State Ultrasonic Detection

High Sensitivity and High Stability Dual Fabry-Perot Interferometric Fiber-Optic Acoustic Sensor Based on Sandwich-Structure Composite Diaphragm

Eccentric Design of Fabry-Perot Interferometer for High Sensitivity and Broadband Ultrasound Sensing

Dual-Polarization Fiber Optic Differential Interferometer for High-Sensitivity Sensing Applications

Low-Frequency Vibration Sensor with Dual-Fiber Fabry–Perot Interferometer Using a Low-Coherence LED

A Theoretical Analysis on Parameters of Fiber Optic Displacement Sensor

Guided Wave and Damage Detection in Composite Laminates Using Different Fiber Optic Sensors.

A Comprehensive Study of Optical Fiber Acoustic Sensing

Detection of Ultrasonic Stress Waves in Structures Using 3D Shaped Optic Fiber Based on a Mach–Zehnder Interferometer

High sensitivity fiber optic angular displacement sensor and its application for detection of ultrasound

The Performance Characterization and Optimization of Fiber-Optic Acoustic Pressure Sensors Based on the MOEMS Sensitized Structure

Demonstration of Fiber-Optic Seismic Sensor With Improved Dynamic Response in Oilfield Application