Abstract:Paper for recycling has become a promising raw material for the pulp and paper industry due to its low cost and because it is conducive to sustainable development. Unfortunately, recycled paper contains a high volume of printed paper that is difficult to deink, which restricts its applications. Flotation deinking plays an essential role in the product quality and process cost of wastepaper recycling. This study was performed to evaluate the deinkability of environmentally friendly offset inks by flotation deinking. For this purpose, three mineral oil free series of four-color inks, namely, hybrid light emitting diode ultraviolet (LED–UV), LED–UV, and vegetable oil-based inks, were printed on white lightweight coated papers under laboratory conditions. The deinking methodology involves repulping, deinking agent treatment, flotation, hand sheet making, and evaluation of the produced hand sheets. The obtained results indicated that the hybrid LED–UV prints had the best deinkability. After flotation deinking, the deinking efficiency and the whiteness of the hybrid LED–UV ink increased by 58.1% and 47.6%, respectively. LED–UV ink had a 46.9% increase in the deinking efficiency and a 37.0% increase in the whiteness of the hand sheet. The deinking efficiency of the vegetable oil-based ink was the lowest, at 42.1%, and the whiteness of the hand sheet increased only by 23.8%. The particle size distribution analysis demonstrated that the hybrid LED–UV four-color ink exhibited a larger value of the average particle size than the two other. Scanning electron microscopy revealed that the hybrid LED–UV ink particles on the surface of the fibers were the least abundant after deinking. The physical strength properties of the hand sheets, including tensile index, folding resistance, and interlayer bonding strength of the hybrid LED–UV, LED–UV inks, and vegetable oil-based inks, increased.

Parameters Analysis of Column Flotation Deinking Process

Optimization of key link parameters and mechanism of the jet-stirring synergistic column flotation method

Experimental and Computational Analysis of the Impeller Angle in a Flotation Cell by PIV and CFD

Analysis of Flow Field in the KYF Flotation Cell by CFD

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion

Exploration of Removing Unburned Carbon from Fly Ash by Column Flotation

Characterization of Particle Fluidization in a New Type of Fluidized Bed Flotation Unit

Effects of a cyclonic microbubble flotation column operating parameters on coal process responses

Flotation de-inking for recycling paper: contrasting the effects of three mineral oil-free offset printing inks on its efficiency

The Evaluation Method of Advanced and Available Technologies for Energy Conservation and Emissions Reduction of Deinking Process

Application and Development of Separation and Enrichment Technique for Floatation in Analytical Chemistry

Study on the effect of flow field optimization on flotation efficiency

Comparison and selection of flotation processes for the separation of fine and difficult-to-float coal particles

Research on control parameter of efficient flocculation basin

Separation performance of mechanical flotation cell and cyclonic microbubble flotation column: in terms of the beneficiation of high-ash coal fines

Analysis Of Electrochemical Character Affecting Deinking Efficiency Of Onp

High-turbulence fine particle flotation cell optimization and verification

Study on optimal conditions of flocculation in deinking wastewater treatment

Exploring the Relationships between Gas Dispersion Parameters and Differential Pressure Fluctuations in a Column Flotation

An Investigation of Nanobubble Enhanced Flotation for Fly Ash Decarbonization

Study on the operation performance and floc adhesion mechanism of dissolved air flotation equipment