Abstract:The aerodynamic drag characteristics of a passenger car have, typically, been defined by a single parameter: the drag coefficient at a yaw angle of 0°. Although this has been acceptable in the past, it does not provide an accurate measure of the effect of aerodynamic drag on fuel consumption because the important influence of the wind has been excluded. The result of using drag coefficients at a yaw angle of 0° produces an underprediction of the aerodynamic component of fuel consumption that does not reflect the on-road conditions. An alternative measure of the aerodynamic drag should take into account the effect of non-zero yaw angles, and a variant of wind-averaged drag is suggested as the best option. A wind-averaged drag coefficient is usually derived for a particular vehicle speed using a representative wind speed distribution. In the particular case where the road speed distribution is specified, such as for a driving cycle to determine fuel economy, a relevant drag coefficient can be derived by using a weighted road speed. An effective drag coefficient is determined with this approach for a range of cars using the proposed test cycle for the Worldwide Harmonised Light Vehicle Test Procedure, WLTP. The wind input acting on the car has been updated for this paper using recent meteorological data and an understanding of the effect of a shear flow on the drag loading obtained from a computational fluid dynamics study. In order to determine the different mean wind velocities acting on the car, a terrain-related wind profile has also been applied to the various phases of the driving cycle. An overall drag coefficient is derived from the work done over the full cycle. This cycle-averaged drag coefficient is shown to be significantly higher than the nominal drag coefficient at a yaw angle of 0°.

Analysis of Automobile Air Drag Coefficient

Aerodynamic Drag Features on Automobile with Non-smooth Surfaces

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Parametric Analysis of the Drag Torque Model of Wet Multi-Plate Friction Clutch with Groove Consideration

Drag Reduction Via Turbulent Boundary Layer Flow Control

Study of the automotive aerodynamic performance affected by entrance structure of forecabin

A Novel Prediction Model of Total Drag Coefficient of an MPV Vehicle Based on LSA Optimization

Optimization of aerodynamic drag reduction for vehicles with non-smooth surfaces and research on aerodynamic characteristics under crosswind

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

DRAG PREDICTION AND REDUCTION FOR CIVIL TRANSPORTATION AIRCRAFT

Extended Study of Full-Scale Wind Tunnel Test and Simulation Analysis Based on DrivAer Model

Current state and prospects on applications of ship drag reduction using air lubrication

Numerical Simulation of Drag Characters of Supercavity Vehicles with Various Afterbodies

City Car Drag Reduction by Means of Shape Optimization and Add-On Devices

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

A drag coefficient for application to the WLTP driving cycle

Drag reduction technology and devices for road vehicles - A comprehensive review

Computational analysis of air jet wheel deflector for aerodynamic drag reduction of road vehicle

Introduction of a New Car Model Series for Aerodynamics Research

Research Progress of Air Lubrication Drag Reduction Technology for Ships

Analysis of Aerodynamic Drag Reduction on Automobile by Using Bionic Non-smooth Surface