Abstract:This study focused on optimizing the hot forging process for AISI 1045 medium carbon steel ball joints, which is crucial for enhancing both their mechanical properties and production efficiency. Traditional hot forging processes often face challenges due to variations in flow stress and microstructural outcomes, which can result in a suboptimal product performance. To address these challenges, this research employed the Taguchi method in conjunction with a finite element (FE) simulation to identify the optimal forging parameters. The Arrhenius constitutive model, based on the Zener–Hollomon parameter, was applied to predict the flow stress with a high level of accuracy, achieving a coefficient of determination (R2) of 0.968 and an average absolute relative error (AARE) of 7.079%. An analysis of variance (ANOVA), a statistical innovation that partitions the total variation into components linked to key process factors, was utilized to determine the significance of these parameters. The ANOVA revealed that the billet temperature played a significant role in influencing the preforming force, finishing force, and mean stress, with a maximum impact of 62.30%, 59.50%, and 94.20% on the variation in the response variable, respectively. Additionally, the friction factor significantly affected the preforming and finishing forces, contributing 36.19% and 38.28%. The validation of the model through both simulations and practical experiments is a testament to the reliability of this research, demonstrating the accuracy of the model with minimal discrepancies in the forging forces and exhibiting errors of just 2.88% and 3.40%. Furthermore, microstructure modeling successfully predicted the key outcomes, such as the grain size and pearlite volume fraction, validating the effectiveness of the simulation in forecasting microstructural characteristics.

Optimization for cold heading process and die design of bearing steel ball by finite element simulation and orthogonal test method

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

SIMULATION ANALYSIS OF WHEEL BEARING FORGING PROCESS BASED ON DEFORM

Finite Element Simulation on Cold Forging Process of Back Gear

The Design Optimization for Hot Forging Process of Connecting-rod Based on Approximate Model and Numerical Simulation

Billet Optimization for Steering Knuckle Using Taguchi Methodology

Optimizing Die Structure Using Finite Element Simulation

Analysis on the Process of Cold Enclosed Precision Forging of Starlike Sleeve

Numerical Simulation and Optimization of Press Forging Process for Aviation Connector

Research on Multiple-Objective Design Optimization and Numerical Simulation of Hot Forging Process

Numerical optimization on hot forging process of connecting rods based on RSA with experimental verification

Cylindrical Billet Size Optimization for Hot Closed-Die Forging of the Upper Ball Joint

Finite element analysis on axial-pushed incremental warm rolling process of spline shaft with 42CrMo steel and relevant improvement

STUDY ON THE NUMERICAL SIMULATION OF MULTI-STAGE ROTARY FORGING OF A NON-AXISYMMETRIC PART AND THE CAE ANALYSIS OF THE DIE STRENGTH

Predictive Modeling and Optimization of Hot Forging Parameters for AISI 1045 Ball Joints Using Taguchi Methodology and Finite Element Analysis

Study on Roll Forming Process Simulation and Roll Diameters Optimization

Study on Process Optimization and Objective Functions of Sheet Metal Forming Based on FEA

Microstructure Optimization of Heavy Forgings Based on Composite Design

Defect analysis and design optimization on the hot forging of automotive balance shaft based on 3D and 2D simulations

FEM Analysis and Process Parameter Optimizing of High Speed Wire Rod During Reducing and Sizing Multi-Pass Groove Rolling Process