Abstract:As a new element of flame, tubular flame especially the swirl type has excellent flame characteristics such as negligible heat loss, aerodynamic stability and thermodynamic stability. The premixed swirl type tubular flame has been extensively studied through a variety of burners, and various applications have been proposed and demonstrated for determining the flammability limits, stabilizing a flame in a high speed flow, and obtaining a uniform and large-area laminar flame to heat iron slab or to reduce steel sheet surface. To avoid potential hazards of flame flash back even detonation in premixed mode, an inherently safe technique of rapidly mixed tubular flame combustion has proposed, in which the fuel and the oxidizer are individually and tangentially injected into a cylindrical burner from four rectangular slits. Recently this burner has been successfully adopted to investigate the characteristics of oxygen enhanced combustion of methane, which provides a useful tool to save energy and reduce emissions. The results illustrate that the mixing of fuel and oxidizer plays a vital role in obtaining a stable tubular flame. To fundamentally investigate the flow field especially the mixing process in the rapidly mixed tubular flame burner, a series of measurements have been made on the flow visualization and velocity distribution with a Particle Image Velocimetry (PIV) system. Two groups of optically accessible quartz burners were designed: in the first group, the width of the rectangular slit was maintained as 2 mm while the length varied from 8 to 64 mm, in which the swirl number (Sw) varied from 2.75 to 0.34; in the second group, the slit width increased from 1 to 3 through 2 mm while maintaining the slit length as 8 mm, in which the swirl number decreased from 5.89 to 1.70 through 2.75. The total flow rate and the mean injection velocity ratio of fuel inlet to oxidizer inlet were also varied to measure the mixing layer thickness through flow visualization in a cross section perpendicular to the tube axis around the center of the burner. Detailed observation shows that the mixing layer thickness around the inlet is dominated by a boundary layer type flow regardless of swirl number and injection velocity ratio. The coefficients for the thickness estimation based on the square root of injection velocity (in reverse relationship) have been summarized. In addition, for a constant total flow rate, the mixing is fastest when the mean injection velocity of each inlet is the same. The flow visualization and the axial velocity distribution in a plane containing the tube axis were also analyzed to illustrate the flow motion downstream of the injection slits. The results demonstrate that a reverse flow appears in the burners of swirl number larger than 0.60.

INVESTIGATION OF THE STRUCTURES AND AERODYNAMICS OF STAGNATION-POINT SWIRL FLAMES

Visualization of Multi-Regime Turbulent Combustion in Swirl-Stabilized Lean Premixed Flames

Experimental and Numerical Study of a Two-Stage Swirl Burner

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

POD and DMD Analysis of Dynamic Flow Structures in the Recirculation Region of an Unconfined Swirl Cup

Experimental study of stratified swirl flame dynamics in a model gas turbine combustor

Study on the flow characteristics and oscillating mechanism of a swirl flame

LES Investigation of Swirl Intensity Effect on Unconfined Turbulent Swirling Premixed Flame

Experimental Investigation on the Symmetry and Stabilization of Ethanol Spray Swirling Flames Utilizing Simultaneous PIV/OH-PLIF Measurements

An Experimental Study on the Flow Visualization in Rapidly Mixed Tubular Flame Burners of Various Swirl Numbers

The effects of swirl number on the combustion characteristics in an internally-staged combustor

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Design and Decomposition Analysis of Mixing Zone Structures on Flame Dynamics for a Swirl Burner

Experimental study on combustion flow field characteristics of swirl combustor

Investigation of Flame and Flow Response in the Swirler with Different Divergence Cups and Central Body under External Excitation

Experimental Study on Flame Response Characteristics of a Non-Premixed Swirl Model Combustor

Numerical Simulation and Flame Characteristics Analysis of Non-Premixed Swirling Combustion

Observations on the mixing process between an inner cold air stream and an outer swirling tubular flame stream

Isothermal swirling flow characteristics and pressure drop analysis of a novel double swirl burner

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures