Abstract:In this paper, by constructing a 3-DOF (Degrees of freedom) laser interferometer on each displacement axis of motion, the main errors during the coordinate measuring machines (CMM) motion are dynamically monitored. The 3-DOF laser interferometer is composed of three-beam dual-frequency laser interferometers, and each dual-frequency laser interferometer obtains the reflection signal through a corner cube reflector. By determining the position parameters of the three corner cube reflectors and three sets of feedback signals, the 3-DOF laser interferometer can calculate the three parameters, i.e., the axial displacement and the lateral pitch and yaw angles. The device is installed on each motion axis of the CMM to monitor 9 major errors during the whole motion system. Laser signals are used to track position information by establishing the rigid body transformation relationship. Therefore, the 9 errors can be updated in real time through the monitoring system to replace the calibration results to calculate the probe position. The position error of the CMM probe caused by the dynamic error is simulated. Monte Carlo method is employed to obtain the error situation and monitor the residual error distribution throughout the measurement movement process. The errors can be corrected immediately without recalibrating the CMM error parameters especially when the dynamic error changes significantly. In addition, environmental errors are also introduced in the model to analyze the impact on the accuracy of position monitoring. The method proposed can reduce the position monitoring error within 0.1 mu m. Using this method, the error source of a dynamic error monitoring system can be designed in a simulated environment, which can be used as the basis for the design of the dynamic error monitoring system.

The research and present application about the dynamic error of Coordinate measuring machines

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Study of coordinate measuring machines synthetic dynamic error under different positions and speeds based dual linear returns

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Error-simulation System Modeling and Error Analyzing of an Articulated Arm Coordinate Measuring Machine

Dynamic positioning error analysis and modeling of CNC machine tool guideway system

A Study on the Model of 3D-Coordinate Measuring Machine Dynamic Characteristic

Research on New Software Compensation Method of Static and Quasi-Static Errors for Precision Motion Controller

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Calibration and Compensation of Dynamic Abbe Errors of a Coordinate Measuring Machine

The Partial Least-Squares Regression Analysis of Impact Factors of Coordinate Measuring Machine Dynamic Error

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer

A Study on the Model of 3D-Coordinate Measuring Machine Error Compensation Based on Finite Element Simulation

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

The Formulation of the Examination Standard and Progresses of Coordinates Measuring Machines

Dynamic error modeling and analysis of articulated arm coordinate measuring machine with integrated joint module

Study on the Influence Rules of Static Mechanical Errors in Four-Linkage Precision Measuring Instrument and the Realization of Real-Time Error Correction with Computer-Aided Modeling Method

Research Status and Trend of Geometrical Error Measurement of CNC Machine Tools

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

Research of Error Compensation Technology by Gas-magnetic Bearings Spindle System

Research on the Thermal Error of the 3D-Coordinate Measuring Machine Based on the Finite Element Method