Abstract:Conventionally, micro-sized irregular polyaniline (PANI) particles were synthesized by dropwise addition of the ammonium persulfate (APS) solution into the aniline (ANI) solution with mechanical stirring. By replacing the mechanical stirring with an ultrasonic irradiation, PANI nanofibers in diameters of ∼50nm and lengths of 200nm to several micrometers were prepared. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) showed that at the early stage of polymerization, the polymers formed in both the mechanical stirred and ultrasonicated systems are in the form of nanofiber. However, with continuing of the reaction, these primary nanofibers grow and agglomerate into irregular shaped PANI particles in the mechanical stirred system, while in the case of the ultrasonic irradiation, the growth and agglomeration are effectively prevented, preserving thus the PANI nanofibers in the final product. By increasing the APS/ANI molar ratio from 0.5 to 2.5, the aspect ratios of the PANI nanofibers decreased. The PANI nanofibers exhibit higher solubility than the irregular shaped PANI particles. Although the yield, as well as the conductivity of the ultrasonic synthesized PANI nanofibers, was slightly lower than the irregular shaped PANI particles, the ultrasonic synthesis approach is one of the facile and scalable approaches in synthesizing PANI nanofibers in comparison with other ones without use of templates (e.g., the interfacial polymerization and rapid mixing polymerization). UV–Vis and Fourier transformed infrared (FTIR) spectra indicated ultrasound had no significant effect on the chemical structure of the PANI.

Preparation and Characterization of Uniform Polyaniline Nano-Fibrils Using the Anodic Aluminum Oxide Template

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

Preparation of ZnO/PANi Composite Nanowire and Their Interactions on Interface between ZnO and PANi

A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline

Studies on Electrochemical Assembling of Ordered Polyaniline Nanowires Array on Anodic Aluminum Oxide Template

Preparation and Characterization of Polyaniline Micro/nanotubes with Dopant Acid Mordant Dark Yellow GG

Formation of Polyaniline Nanofibers: A Morphological Study

Self-Assembled Polyaniline Nanotubes With Rectangular Cross-Sections

Fabrication and Characterization of Silver/Polyaniline Composite Nanowires in Porous Anodic Alumina

Polyaniline nanofibers fabricated by electrochemical polymerization: A mechanistic study

Polyaniline Self-Assembled with Dtpa: Facilely Tuned Morphology and Properties

A Study On The Synthesis, Characterization And Properties Of Polyaniline Nanofibers Using Ferric Chloride As Both Oxidant And Dopant

Preparation and characterization of polyaniline with high electrical conductivity

Soft Template Method to Synthesize Polyaniline Microtubes Doped with Methyl Orange

Fabrication of shape-controllable polyaniline micro/nanostructures on organic polymer surfaces: obtaining spherical particles, wires, and ribbons.

Sonochemical Synthesis of Polyaniline Nanofibers

Effects of Ultrasonic Irradiation on the Morphology of Chemically Prepared Polyaniline Nanofibers

Polyaniline Nanotubes Prepared by One-Step Synergistic Polymerization of Aniline and Acrylic Acid

Synthesis and characterization of "hairy urchin"-like polyaniline by using β-cyclodextrin as a template

Polyaniline with High Crystallinity Degree: Synthesis, Structure, and Electrochemical Properties