Abstract:Abstract It is generally accepted that the fracture strain is dependent on geometry/constraints in metals. However, the currently available implementation of extended finite element method (XFEM) assumes a fixed fracture strain criterion independent of the constraints. The objective of this paper is to develop and implement a variable fracture strain criterion in XFEM that is capable of predicting a wide range of fracture conditions in X65 pipeline steels with various crack tip constraints. Various small-scale tests with different out-of-plane constraints obtained from the literature were simulated using the XFEM in abaqus software. These tests included smooth bar, notched bar, single edge notch tension (SENT), and single edge notch bending (SENB) tests. For each test, the value of the maximum principal strain (Maxpe) as a fracture initiation criterion in the cohesive zone model (CZM) in XFEM framework was varied while keeping the fracture energy constant until the model was able to accurately replicate the reported experimental results. For each test, the crack tip constraints were characterized and the stress triaxialities and Lode angle parameters at the onset of fracture initiation were calculated from the models. The results allowed expressing of the fracture strain as an explicit function of stress triaxiality which was then implemented in abaqus XFEM using UDMGINI subroutine. For the sake of comparison, the tests were simulated in finite element method (FEM) using a similar damage initiation model, namely, the Johnson–Cook (J–C) model. A single model in XFEM was able to accurately replicate the experimental observations for all specimens and compared well to experiments in the way simulated by FEM damage model. However, it was observed that XFEM was more suitable to simulate specimens with pre-existing cracks such as in SENT and SENB tests since the crack grew through elements when mesh refinement was not required around the crack tips. Lastly, the simulated results were found to be less mesh sensitive in XFEM than in FEM damage models.

Fracture simulation based on EA-cohesive model with natural fracture/decohesion mechanism

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Fracture Modeling of Curved Composite Shell Structures Using Augmented Finite Element Method

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

A sophisticated simulation for the fracture behavior of concrete material using XFEM

Effects of the Cohesive Law on Ductile Crack Propagation Simulation by Using Cohesive Zone Models

An Adaptive Stochastic Multi-Scale Method for Cohesive Fracture Modelling of Quasi-Brittle Heterogeneous Materials under Uniaxial Tension

Cohesive Crack Model Based on Extended Finite Element Method

A Unified Fracture Model for X65 Pipeline Material Under Various Constraints Using the Extended Finite Element Method (XFEM)

A heterogeneous cohesive model for quasi-brittle materials considering spatially varying random fracture properties

A combined ALE-cohesive fracture approach for the arbitrary crack growth analysis

Ⅰ/Ⅱ TENSILE-SHEAR MIXED MODE FRACTURE SIMULATION BY 3D DISCRETE ELEMENT METHOD

Ductile failure modeling and simulations using coupled FE–EFG approach

Physics-based modeling of brittle fracture: cohesive formulations and the application of meshfree methods