Abstract:A combined amphiphilic catalyst of octadecyltrimethylammonium bromide (STAB) and phosphotungstic acid was formed directly in a reaction system. Deep desulfurization of dibenzothiophene (DBT) with high selectivity was achieved using the combined amphiphilic catalyst with hydrogen peroxide (H2O2) as the oxidant at 50 degrees C under atmospheric pressure. The optimum molar ratio between STAB and phosphotungstic acid in DBT oxidation has been determined, and the highest reaction rate was obtained when the molar ratio between STAB and phosphotungstic acid approached 1, not 3 as has been reported in some literature, whereas superfluous STAB beyond this ratio caused resistance for mass transfer of products and reagents at the interface. The influence of reaction temperature, catalyst concentration, H2O2/DBT ratio, and mixing conditions on the oxidation of DBT was examined in detail. An increase in the reaction temperature from 40 degrees C to 70 degrees C led to a remarkable increase in the reaction rate. A complete DBT conversion with a DBT concentration of 3000 ppm could be shortened to 10 min as the temperature was elevated to 70 degrees C. The reaction rate of DBT was improved when the H2O2/DBT ratio was increased. Complete sulfur removal from a 3000 ppm dibenzothiophene mixture was achieved within 20 min at 50 degrees C. This oxidation process showed high selectivity toward DBT, and the enhancement of DBT oxidation was illustrated when investigated in the presence of 2-methylnaphthalene.

Oxidative desulfurization of dibenzothiophene catalyzed by carboxyl-functionalized ionic liquid [cmmim]BF_4

Catalytic oxidative desulfurization of BT and DBT from n-octane using cyclohexanone peroxide and catalyst of molybdenum supported on 4A molecular sieve

Bismuth Nitrate As a Catalyst for Oxidative Desulfurization of Dibenzothiophene in Model Oil

Research of desulfurization of dibenzothiophene with SO3H-functionalized morpholine heteropolyacid ionic liquid catalyst

Study on Oxidative Desulfurization of Simulated Oil With The Acetic Acid-based Ionic Liquid Phase Transfer Catalyst

Oxidative desulfurization of dibenzothiophene catalyzed by peroxotungstate on functionalized MCM-41 materials using hydrogen peroxide as oxidant

Catalytic Oxidative Desulfurization of Model Oil over CuWO 4

APPLICATION OF BRφNSTED ACIDIC IONIC LIQUID IN EXTRACTION AND OXIDATION OF DIBENZOTHIOPHENE

Preparation of [C4Pyr] Cl/nTsOH deep eutectic solvents and its application in oxidative removal of dibenzothiophene from model oil

tive desulfurization of fuel with H 2 O 2 catalyzed by molybdenum oxide supported on alumina modi fi ed by Ca 2 + †

Solvent-free oxidation of toluene in an ionic liquid with H2O2 as oxidant

Chemical Oxidation of Dibenzothiophene with a Directly Combined Amphiphilic Catalyst for Deep Desulfurization

Polycrystalline Phase WO3/g-C3N4 As a High Efficient Catalyst for Removal of DBT in Model Oil

Preparation of methylimidazole hydrochloride/oxalic acid type deep eutectic solvent and its application in oxidative desulfurization of model oil

Preparation of Bi2WO6 and Its Ultra-Deep Oxidative Desulfurization Performance in Ionic Liquids

Deep Catalytic Oxidative Desulfurization of Fuels by Novel Lewis Acidic Ionic Liquids

Oxidative Desulfurization of FCC Diesel Oil Using Amphiphilic Catalyst Combined with Solvent Extraction

Ionic liquid-derived molybdenum oxide encapsulated in 3D ordered meso/macroporous ZrO2 matrix as promising catalyst for the oxidation of dibenzothiophene in fuel oil

Study of the preparation of CuWO4/C composite and it's application in oxidative desulfurization of model oil

Ultrasound-assisted Oxidative Desulfurization of Simulated Oil Using g-C3N4

Continuous Auctions and Insider Trading