Abstract:The motivation behind this paper is to develop a spectral-based damage detection and damage localization scheme using in-service ambient vibration in the context of non-model-based damage characterization. In this regard, a response parameter known as spectral moment is implemented for structural damage identification. The damage identification procedure starts with developing response power spectral density (PSD). The principal structural response features are then extracted from the frequency distribution of the spectrum using spectral moments. It is demonstrated that, although, spectral moment is a nonmodal characteristic of a process, it is related to modal parameters of a response signal since the spectral moment at each location is proportional to its corresponding modal vector. Hence, it is expected that due to damage occurrence spectral moment undergoes a variation. On this point, a damage sensitive feature is defined by comparing the spectral moments of two successive states of the structure. It is demonstrated that at a damage location there is a pronounced distinctive change in the indicative feature which is implemented for damage localization. The major advantages of the method include, first, the method works based on output-only measurement data, and second, it does not require any representative model of the structure and finally, unlike modal data that provides information at specific frequencies, the presented method is a broadband approach using information in a wide frequency range. The effectiveness and robustness of the proposed technique was validated by numerical simulations and an experimental case study. A series of numerical simulations with different damage scenarios was carried out on an Euler-Bernoulli beam subject to a band-limited random Gaussian excitation. Damage was simulated by reducing the flexural rigidity of elements at particular locations in single or multiple states. An experimental case study was also investigated utilizing a reinforced concrete jack arch which is one of the major structural components of the Sydney Harbor Bridge. Damage was introduced by creating a crack via applying gradual load using load cell. The numerical and experimental analyses indicated a promising sensitivity of the approach to detect and localize structural damage.

Experimental Investigation on Statistical Moment-based Structural Damage Detection Method

Statistical Moment-Based Structural Damage Detection Method in Time Domain

Generalization of the Statistical Moment-Based Damage Detection Method

Development in Vibration-Based Structural Damage Detection Technique

Vibration-Based Damage Detection with Structural Modal Characteristics

Structural Damage Diagnosis Based on the Temporal Moment of Partially Measured Structural Responses

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Probabilistic Structural Damage Detection Approaches Based on Structural Dynamic Response Moments

Nonlinear Damage Detection Using Higher Statistical Moments of Structural Responses

Study on Damage Identification of High-Rise Buildings

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

Structural damage detection based on stochastic subspace identification and statistical pattern recognition: I. Theory

Spectral-Based Damage Identification in Structures under Ambient Vibration.

Structural damage assessment by a vibration-based method

Experimental Investigation of Damage Identification in Beam Structures Based on the Strain Statistical Moment

Structural Damage Detection By Measured Frequency Change: Analytical And Experimental Study

Damage Detection Method Based on Statistics Characteristics of Vibration Signal

Statistical Damage Identification Method Based on Dynamic Response Sensitivity

Seismic Damage Assessment of High-Rise Structures Based on Experimental Measurements

Structural Damage Presence Detection from Time-Varying Modal Parameters in Earthquake

Structural damage detection based on stochastic subspace identification and statistical pattern recognition: II. Experimental validation under varying temperature