Development of capillary isoelectric focusing electrophoresis method for analysis of isoelectric point of fusion protein FP3

LI Xiang,GAO Xiang-dong,TIAN Hong,RAO Chun-ming
DOI: https://doi.org/10.13200/j.cjb.2012.04.100.lix.015
2012-01-01
Abstract:Objective To develop a capillary isoelectric focusing electrophoresis(cIEF) method for analysis of isoelectric point of fusion protein FP3.Methods A cIEF method was developed by using neutral-coated capillary tube at an effective length of 20 cm,a total length of 30 cm and an inner diameter of 50 μm.The temperature for separation was 20℃;the wavelength for detection was 280 nm;the pressure and time for loading were 20 Psi and 99 s respectively;the voltage and time for separation focusing were 20 kV and 20 min,while those for chemical migration were 25 kV and 25 min,respectively.The effects of various ampholytes,kinds(PharmalyteTM 3-10 and AmpholineTM 3.5-10) and concentrations of solubilizers and voltages for focusing(15,20 and 30 kV) on separation of test samples were compared,based on which the suitability and stability of system as well as reproducibility of the method were verified.Results By the developed cIEF method,the charge-based isoforms of test samples were separated effectively,with a separation degree(USP) of 1.249 between the main and the secondary peaks.By using AmpholineTM 3.5-10,various charge-based heterogeneous components of test samples were separated effectively.The urea at a concentration of 6 mol/L provided a good environment of solubilization.The separation effect was satisfactory at a voltage for focusing of 20 kV.The relative standard derivations(RSDs) of migration times of main and secondary peaks of test samples in five consecutive loadings were 1.29% and 1.32% respectively.The isoelectric points of main bands of test samples ranged from 6.33 to 6.90,and the detection result was stable within 24 h.Conclusion The cIEF method for analysis of isoelectric point of fusion protein FP3 was developed,which showed high separation degree,reproducibility,stability and accuracy and provided a more effective tool for quality control of products of the same kind.
What problem does this paper attempt to address?