Abstract:In this paper, we present some experimental results about the physical effects of a cylinder’s streamwise oscillation motion on a downstream one in a tandem arrangement. The upstream cylinder undergoes a controlled simple harmonic oscillation at amplitudes A/d = 0.2–0.8, where d is the cylinder diameter, and the frequency ratio of \(f_\mathrm{e}/f_\mathrm{s}\) = 0–3.0, where \(f_\mathrm{e}\) is the cylinder oscillation frequency and \(f_\mathrm{s}\) is the natural frequency of vortex shedding from a single stationary cylinder. Under these conditions, the vortex shedding is locked to the controlled oscillation motion. Flow visualisation using the planar laser-induced fluorescence and qualitative measurements using hot-wire anemometry reveal three distinct flow regimes behind the downstream cylinder. For \(f_\mathrm{e}/f_\mathrm{s} > (f_\mathrm{e}/f_\mathrm{s})_\mathrm{c}\), where \((f_\mathrm{e}/f_\mathrm{s})_\mathrm{c}\) is a critical frequency ratio which depends on A/d and Reynolds number Re, a so-called SA-mode occurs. The upstream oscillating cylinder generates binary vortices symmetrically arranged about the centreline, each containing a pair of counter-rotating vortices, and the downstream cylinder sheds vortices alternately at \(0.5f_\mathrm{e}\). For 0.7–1.0 \(< f_\mathrm{e}/f_\mathrm{s} < (f_\mathrm{e}/f_\mathrm{s})_c\) a complex vortex street that consists of two outer rows of vortices generated by the oscillating cylinder and two inner rows of vortices shed from the downstream stationary cylinder, which is referred to as AA-mode. For 0.3–0.6 \(< f_\mathrm{e}/f_\mathrm{s}<\) 0.8–1.0, one single staggered vortex street (A-mode) is observed. It is also found that, when \(f_\mathrm{e}/f_\mathrm{s}\) is near unity, the streamwise interaction of the two cylinders gives rise to the most energetic wake in the cross-stream direction, in terms of its maximum width, and the wake is AA-mode-like. The effects of other parameters such as the spacing between the two cylinders, Re and A/d on the flow pattern are also discussed in details. The observations are further compared to the stationary tandem cylinder cases.

Numerical and Experimental Investigation of a Streamwise Oscillating Cylinder Wake in the Presence of a Downstream Cylinder

Numerical Simulation of Oscillating-Cylinder Effects on a Downstream Cylinder Wake Using Lattice Boltzmann Method

Experimental Investigation On Flow Around A Cylinder Group In Free Surface Cross Flow

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

Wake Flow Behaviour Behind A Smaller Cylinder Oscillating in the Wake of an Upstream Stationary Cylinder

A forced system of two cylinders with various spacings

Numerical Simulation of Three-Dimensional Vortex Dynamics in Wake of A Circular Cylinder

A Comparison Between DNS Derived and Measured Streamwise Oscillating-Cylinder Wake

A numerical study of flow interaction between a cylinder and an oscillating airfoil by using an immersed boundary method

Flow Interaction Between a Streamwise Oscillating Cylinder and a Downstream Stationary Cylinder

Numerical simulation of flow-induced vibration on two circular cylinders in a cross-flow (Part I: Transverse y-motion)

Simulation on forced system of two cylinders using virtual boundary method

Generation of vortices by a streamwise oscillating cylinder

Numerical simulations of Forced oscillations of two circular cylinders in cruciform arrangement

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

Simulation of the Flow Around an Upstream Transversely Oscillating Cylinder and A Stationary Cylinder in Tandem

Numerical Investigation of an Oscillating Airfoil Using Immersed Boundary Method

Numerical Study of Wake and Aerodynamic Forces on Two Tandem Circular Cylinders at Re = 103

Wake of two tandem square cylinders

Numerical Study of an Oscillating Smaller Cylinder in the Wake of an Upstream Larger Cylinder

Aerodynamic characteristics and wake formation behind a pair of side-by-side rectangular cylinders using the lattice Boltzmann method