Abstract:Shape memory polymers (SMPs) can retain a temporary shape after pre-deformation at an elevated temperature and subsequent cooling to a lower temperature. When reheated, the original shape can be recovered. Relatively little work in the literature has addressed the constitutive modeling of the unique thermomechanical coupling in SMPs. Constitutive models are critical for predicting the deformation and recovery of SMPs under a range of different constraints. In this study, the thermomechanics of shape storage and recovery of an epoxy resin is systematically investigated for small strains (within ±10%) in uniaxial tension and uniaxial compression. After initial pre-deformation at a high temperature, the strain is held constant for shape storage while the stress evolution is monitored. Three cases of heated recovery are selected: unconstrained free strain recovery, stress recovery under full constraint at the pre-deformation strain level (no low temperature unloading), and stress recovery under full constraint at a strain level fixed at a low temperature (low temperature unloading). The free strain recovery results indicate that the polymer can fully recover the original shape when reheated above its glass transition temperature (Tg). Due to the high stiffness in the glassy state (T<Tg), the evolution of the stress under strain constraint is strongly influenced by thermal expansion of the polymer. The relationship between the final recoverable stress and strain is governed by the stress–strain response of the polymer above Tg. Based on the experimental results and the molecular mechanism of shape memory, a three-dimensional small-strain internal state variable constitutive model is developed. The model quantifies the storage and release of the entropic deformation during thermomechanical processes. The fraction of the material freezing a temporary entropy state is a function of temperature, which can be determined by fitting the free strain recovery response. A free energy function for the model is formulated and thermodynamic consistency is ensured. The model can predict the stress evolution of the uniaxial experimental results. The model captures differences in the tensile and compressive recovery responses caused by thermal expansion. The model is used to explore strain and stress recovery responses under various flexible external constraints that would be encountered in applications of SMPs.

Finite Element Analysis on Thermo-Mechanical Behavior of Styrene-Based Shape Memory Polymers

Modeling the shape memory effect of shape memory polymer

A Molecular Dynamics Investigation of the Deformation Mechanism and Shape Memory Effect of Epoxy Shape Memory Polymers

A Glass Transition Model for Shape Memory Polymer and Its Composite

Thermal-mechanical Behavior of Styrene-Based Shape Memory Polymer Tubes

An investigation on shape memory behavior of glass fiber/SBS/LDPE composites

Finite Deformation Thermo-Mechanical Behavior of Thermally Induced Shape Memory Polymers

Influence of Structural Relaxation on Thermomechanical and Shape Memory Performances of Amorphous Polymers

3D Phase-Evolution-based Thermomechanical Constitutive Model of Shape Memory Polymer with Finite Element Implementation

Analysis of the Finite Deformation Response of Shape Memory Polymers: I. Thermomechanical Characterization

Constitutive model for shape memory polymer and its thermodynamic responses in finite element analysis

Experimental study of thermo-mechanical behavior of a thermosetting shape-memory polymer

Formulation and Numerical Implementation of Tensile Shape Memory Process of Shape Memory Polymers

A 3D Finite Strain Constitutive Model for Shape Memory Polymers Combined Viscoelasticity and Storage Strain

A 3D Finite Strain Viscoelastic Constitutive Model for Thermally Induced Shape Memory Polymers Based on Energy Decomposition

Thermomechanics of Shape Memory Polymers: Uniaxial Experiments and Constitutive Modeling

Mechanical Behaviors of Shape Memory Polymer with Linear Monomer

Thermo-mechanical Behavior Prediction of Shape Memory Polymer Based on the Multiplicative Decomposition of the Deformation Gradient

A constitutive model of shape memory polymers based on glass transition and the concept of frozen strain release rate

Thermomechanical Constitutive Models of Shape Memory Polymers and Their Composites

Thermomechanical Properties of Shape Memory Polyruethane