Abstract:Conductive ink with stable dispersion and excellent printing properties can be produced using graphene-based nanomaterials and suitable solvents for flexible printed electronics applications. Eco-friendly water-based inks can be used as an alternative to organic solvents-based inks to minimize environmental impacts. Graphene oxide (GO) nanofillers can form stable aqueous dispersions and can be produced in bulk quantities using chemical exfoliation methods. Hence GO nanofillers can be used as a filler to produce water-based conductive ink for printed electronics applications. However, the higher surface tension and lower stability are major drawbacks which limit its printing properties. Natural surfactants can minimize these issues to ensure smooth printing with a higher shelf life as compared to harmful synthetic surfactants. This study aimed to investigate the role of natural-based surfactants such as gum arabic, cellulose nanocrystals and alkali lignin in producing stable and high performing water-based GO ink. The prepared ink samples were characterized for their wetting properties, printability, and storage time. The ink was also investigated for structural, functional groups, and stability. The printed patterns were investigated for morphological and electrical properties. The results from study indicate that the GO with alkali lignin surfactant gives long-term stability and better printing properties compared to other samples. The printed pattern after thermal reduction was found to have a conductivity of 833 S/m, which was reduced by only 2.6% after 100 bending cycles, whereas the electrical conductivity was reduced by only 0.6% after 10 rolling cycles indicating a great potential to be used in flexible electronic devices.

Effect of Surfactant on the Properties of Gel Ink

Effect of Defoaming Agent on the Properties of Gel Ink

The Influence of Polyether Structure on Deinking Efficiency

Alleviation of the plastic deformation of gel ink under strong stress through an esterification of xanthan gum reinforcing its double helix structure

Effect of using ink containing polyacrylate and silicone surfactant on the inkjet printing of quantum dot films

The Effects of Solid Particle Containing Inks on the Printing Quality of Porous Pharmaceutical Structures Fabricated by 3D Semi-Solid Extrusion Printing.

Synergistic Effects of Alpha Olefin Sulfonate and Sodium Alginate on Inkjet Printing of Cotton/Polyamide Fabrics

Study on Preparation Process of Carbon Black Dispersion for Aqueous Ink

The Characterization of the Stability of Gel Ink by Rheological Method

Study of Droplet Formation Process During Drop-on-demand Inkjetting of Living Cell-Laden Bioink.

The effect of ink formulation on colorimetric properties of inkjet printing considering the impact of substrates

Study on the Film-Forming Mechanism of Polymer–Metal Oxide Composite Ink Systems Containing Different Polymer Molecules

Morphology Modulation of Direct Inkjet Printing by Incorporating Polymers and Surfactants into a Sol-Gel Ink System.

Fabrication of gelatin-based printable inks with improved stiffness as well as antibacterial and UV-shielding properties

Flow Curve and Dynamic Viscoelastic Properties of Carbon Black Gel Ink

Effect of natural surfactant on the performance of reduced graphene oxide conductive ink

The Exploration of Ink Formulations in Binder Jet 3D Printing Drugs

Effect of Monomer on Performance of UV-LED Inkjet Ink

Solvent effects on the rheology of fuel cell catalyst ink and the adsorption of ionomers on the particles

Effect of Defoamer on the Performance of Plastic Water-Based Flexographic Ink