Preparation and properties of ceramic coating on Q235 carbon steel by plasma electrolytic oxidation

Yunlong Wang,Zhaohua Jiang,Zhongping Yao
DOI: https://doi.org/10.1016/j.cap.2008.12.004
IF: 2.856
2009-01-01
Current Applied Physics
Abstract:Ceramic coating was achieved on Q235 carbon steel by PEO (plasma electrolytic oxidation, PEO) without any pretreatment in sodium aluminate system. The discharge process as well as the accompanied surface morphology evolution was analyzed. The phase and elemental composition of the coatings were also investigated. The corrosion, mechanical and tribological properties of the ceramic coating were primarily studied. It is found that the coating surface was porous and the thickness of the coating was about 120μm. The coating mainly consisted of FeAl2O4, Fe3O4 and a little γ-A12O3. The corrosion current of the coated sample was 3.082×10−7A/cm2, which was decreased by two orders of magnitude compared with the uncoated one. The micro hardness of the ceramic coating was 1210Hv, which was about three times as that of the uncoated sample. The friction coefficient of coated sample was also well improved. Investigations revealed that PEO provided a promising technique for preparation of protective ceramic coatings on steels.
What problem does this paper attempt to address?