Electro-catalytic ozonation of contaminants in landfill leachate: Optimization by BBD, economic evaluation, mechanism, and reaction pathway
Mohammad Mehralian,Mohammad Hassan Ehrampoush,Ali Asghar Ebrahimi,Arash Dalvand
DOI: https://doi.org/10.1016/j.colsurfa.2024.133263
IF: 5.518
2024-02-02
Colloids and Surfaces A Physicochemical and Engineering Aspects
Abstract:An electro-catalytic ozonation process with ZnO nano-granules as a catalyst (CFR-EC/O 3 -UV@ZnO process) was developed to treat raw landfill leachate. LC-MS analysis was applied to determine organic compounds. After CFR-EC/O 3 -UV@ZnO process, COD, TOC, BOD 5 , NH 4 + -N, P-PO 4 −3 , color, and turbidity were reduced to 90.9%, 89.4%, 89.1%, 89.5%, 87.7%, 99.1%, and 99.7%, respectively under the optimum conditions of 10 g.hr −1 O 3 dosage, pH 11.0, and 0.006 L.min −1 flowrate. At the same conditions removal efficiencies of heavy metals (HM s ): Cr 6+ , Pb 2+ , As 3+ , Mg 2+ , B 3+ , Mn 3+ , Ni 2+ , Ba 2+ , Hg 2+ , Co 2+ , Fe 2+ , and Li + were obtained 90%, 84.7%, 90%, 99%, 83.7%, 95%, 20%, 75%, 91%, 90%, 78% and 60%, respectively. In spite of high COD and BOD 5 removal efficiencies, the process could not remove two organic substances including diphenylamine and 2,2,4-trimethyl-1,3-pentanediol. A high R 2 value of 0.99 demonstrated the accuracy of the selected model. Economic evaluation depicted that the current process cost 0.95 $.m −3 . Finally, this process is suggested for the treatment of landfill leachate with relatively high efficiency.
chemistry, physical