Abstract:An improved multi-dimensional CFD code has been employed to simulate the spray, combustion and pollution formation process within a diesel engine cylinder. The computational results are compared with experimental data from an optical high-speed research engine equipped with a high-pressure injection system. Several spray sub-models have been implemented into the code, and their influence on the predicted droplet characteristic was evaluated. These models account for liquid core atomization, droplet secondary breakup, spray/wall interaction, droplet turbulent dispersion and evaporation. These models improve the prediction of the droplet sizes within a diesel spray and provides a more accurate initial condition for the evaporation, combustion models. The combustion sub-model employed has two components: one for predicting auto-ignition and one for computing the subsequent combustion of the ignited gas. Thermal NOx formation is calculated according to the extended Zeldovich mechanism, which gives the NOx formation as a function of temperature and O, H and OH radical concentrations. Soot formation process adopted in present study is modeled according to a hybrid chemical kinetics/turbulent mixing controlled rate expression. For the engine configurations and operating conditions considered, in most case the calculated cylinder averaged results show good agreement between measured and global pressure, heat release rate and emission data, but in some case they have limitations. Discrepancies are highlighted and possible reasons suggested. The major influences of the injection timing and combustion chamber geometry on the pollutant formation processes have been identified. The calculated results provide a detailed insight into the processes governing combustion and pollutant formation in spray flames under diesel engine conditions. The good agreement indicates that computer models are available for use by the engine industry to provide directions for engine design.

Effect of Heat Transfer Space Non-Uniformity of Combustion Chamber Components on In-Cylinder Soot Emission Formation in Diesel Engine

Effect of Piston Crevices on 3D Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural Gas Spark Ignition

Simulation of In-Cylinder Radiative Heat Transfer of Diesel Engine with Monte-Carlo Method

Numerical Study of Soot Particles from Low Temperature Combustion of Engine Fueled with Diesel Fuel and Unsaturation Biodiesel Fuels

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Experimental Investigation and Numerical Modeling of Spray Combustion and Emission in a Diesel Engine

3D Numerical Simulation of Spray and Combustion Process for In-cylinder DI Gasoline Engine

Effect of Key Structure Parameters of Passive Pre-chamber on In-Cylinder Combustion Processes and Emissions within a Gasoline Engine

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Study of In-Cylinder Heat Transfer Boundary Conditions for Diesel Engines under Variable Altitudes Based on the CHT Model

Numerical Assessment of Combustion Behavior and Emission Formations in an Ultrasonic-Assisted Ignition Engine

Numerical Simulation on Quasi-Homogeneous Mixture Formation in Diesel Engines

Numerical Investigation of Pre-Chamber Jet Combustion in a Light-Duty Gasoline Engine

Effects of Injection Strategy on Soot Formation in GDI Engines

Design and Tests of a Combustion Chamber for an Electrically Controlled,single-Cylinder Diesel Engine

3-D Simulation of Soot Formation in a Direct-Injection Diesel Engine Based on a Comprehensive Chemical Mechanism and Method of Moments

Effects of Combustion Chamber Necking Sizes on Combustion Process of Diesel Engine

Effect of Different Loads, Pilot Injection and Main Injection Timings on Oxygen-enriched Combustion in Diesel Engine

Numerical Simulation on High Density-Low Temperature Combustion in Diesel Engines

Numerical Simulation and Experiment for Soot and NOx Emission in Diesel Engine

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine