Abstract:POE-graft-methyl methacrylate and acrylonitrile (POE-g-MAN) was prepared by suspension graft copolymerization of methyl methacrylate (MMA) and acrylonitrile (AN) onto polyethylene-octene copolymers (POE). POE-g-MAN/SAN resin blends (AOMS) were prepared by blending POE-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of reaction conditions on the graft copolymerization and the toughening effect of POE-g-MAN on SAN resin were discussed. The results showed that the optimized reaction conditions were AN/(MMA + AN) ratio of 15 wt%, POE/(POE + MM − AN) ratio of 60 wt%, BPO/(POE + MMA − AN) ratio of 1 wt%, toluene dosage of 44.4 wt%, PVA dosage of 0.4 wt%, SDS dosage of 0.07 wt%, aqueous phase/oil phase mass ratio of 1.5, at 80 °C for 20 h, and when the POE/AOMS mass ratio was 25 wt% under the optimized reaction conditions, the notched Izod impact strength of AOMS reached 54.0 kJ/m2. Fourier transform infrared spectroscopy provided substantial evidence of grafting of MMA and AN onto POE chains, and differential scanning calorimetry showed that the graft branches affected the crystallization of POE chains and made the melt temperature and the fusion heat be lower. Transmission electron microscopy analysis showed that the highest toughness occured when the size of POE-g-MAN particles and the surface to surface interparticle distance were proper. Scanning electron microscopy analysis indicated that the AOMS fracture surface had plastic flow visible which looked like a fibril morphology when POE content was 25 wt% with the AN/(MMA + AN) ratio (f AN) of POE-g-MAN of 15 wt%. The toughening mechanism of AOMS was shear yielding of matrix, which endowed AOMS with remarkable toughness. Dynamic mechanical thermal analysis showed that the compatibility of the POE phase and SAN phase improved after graft copolymerization of MMA and AN onto POE.

Synthesis of POE-g-MAS by Suspension Graft Copolymerization and Its Characterization

Synthesis and Characterization of PE-b-POEGMA Copolymers Prepared by Linear/Hyperbranched Telechelic Polyethylene-Initiated ATRP of Oligo(ethylene glycol) Methacrylates

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

The Preparation and Characterization of PMMA/POSS-OH Hybrid Fiber

Synthesis of Polyethylene-G-polydimethylsiloxane Graft Copolymers by Copolymerization of Ethylene with Polydimethylsiloxane Macromonomer

Graft Polymerization of Styrene-Acrylonitrile onto Polyethylene-Octene Elastomer and Characterization of Its Product

Design of Well-Defined Polyethylene-g-poly-methyltrifluorosiloxane Graft Copolymers Via Direct Copolymerization of Ethylene with Polyfluorosiloxane Macromonomers

Study of toughening effect of POE-g-MAS on SAN resin and compatibility of the blends

Synthesis and characterization of polyethylene-octene copolymer grafting styrene-acrylonitrile copolymer

Preparation of POE Grafted with Maleic Anhydride by Reactive Extrusion

Synthesis of POE-graft-methyl Methacrylate and Acrylonitrile and Its Toughening Effect on SAN Resin

Solvothermal Process for Grafting Maleic Anhydride Onto Poly(ethylene 1-Octene)

Properties of Poly(ethylene 1‐octene)‐g‐maleic Anhydride Copolymers Prepared Via Solvothermal Process

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Characterization of chemical structure and morphology of MCS graft terpolymer

Graft Reaction of Styrene-acrylonitrile Onto Metallocene-Based Polyethylene-Octene Elastomer and Its Toughening Effect on SAN

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

The mechanical properties, compatibility, and thermal stabilities of poe-graft-methyl methacrylate and acrylonitrile(POE-g-MAN)/ styrene- acrylonitrile copolymer (SAN Resin) blends

Synthesis and Characterization of Polystyrene-G-polydimethylsiloxane Copolymers

Undecylenic Acid Grafting on Ethylene–octene Copolymer in Molten State

Preparation of POE-g-MAH and Its Adhesive Mechanism for Aluminum