Abstract:Titanium dioxide (TiO2) has good photocatalytic activity and can degrade environmental pollutants by oxidation. It has been used in photocatalysis, on antibacterial, antifouling and self-cleaning surfaces, and ultraviolet (UV) detectors. However, it predominantly absorbs UV light and has low absorption of visible light. Improving antibacterial efficiency in the visible light region has consistently been a key research direction for TiO2 antibacterial properties. Currently, to improve TiO2 photocatalytic efficiency under visible light, multiple schemes have been proposed, such as metal or non-metal doping, and laser surface or vacuum heat treatment. These methods introduce point defects in the TiO2 lattice, and narrow the band gap by changing the semiconductor energy band and introducing impurities or defect energy levels in the band gap, thus enhancing visible light absorption. To better understand the TiO2 antibacterial mechanism, it is necessary to accurately control its morphology, composition, and crystal structure. Thin film materials adequately meet these requirements. Recently, pulsed laser deposition (PLD) has become a widely adopted film deposition technology owing to its simple system setup, wide range of deposition conditions, material selection and ability to prepare high-quality repeatable films. In this study, TiO2 thin films are prepared using PLD, and the oxygen vacancy concentration on the TiO2 surface is increased by hydrogen reduction heat treatment to enhance its antibacterial properties. Results demonstrate that the TiO2 films grown on a single crystal yttria stabilized zirconia (YSZ) substrate are the highly preferred anatase phase, and the higher the growth temperature, the stronger the X-ray diffraction (XRD) peak of the anatase phase and the denser the film. The antibacterial properties of 350 nm thick TiO2 film grown at 600 celcius were measured and it was identified that the antibacterial rate is approximately 86%. The sample was further reduced in a 4% H2 atmosphere, and it was confirmed that the antibacterial rate increased to approximately 97%. Test results demonstrate that through X-ray photoelectron spectroscopy (XPS), a UV-visible spectrophotometer (UV-visible) and a laser Raman spectrometer (PL), additional oxygen vacancies formed on the TiO2 surface after reduction heat treatment, and oxygen vacancy defect energy levels formed in the TiO2 band gap. This resulted in enhanced light absorption in the visible region and higher antibacterial performance. The material defect is controlled by the hydrogen reduction process, and the TiO2 thin film photocatalytic antibacterial property and antibacterial mechanism were studied. This straightforward method for regulating TiO2 light absorption provides technical feasibility for scale growth.

Research Progress of TiO2-based Antibacterial Material

The latest research progress on the antibacterial properties of TiO2 nanocomposites

Progress in Photocatalytic Oxidation of Organic Contaminants Using TiO2 as the Catalyst

Recent Progress in Photocatalytic Antibacterial

Towards molecular understanding of surface and interface catalytic engineering in TiO 2 /TiOF 2 nanosheets photocatalytic antibacterial under visible light irradiation

Research on the performance and mechanism of enhancing TiO 2 antibacterial and photodriven sterilization by pyrite composition

TiO2-based nanosystem for cancer therapy and antimicrobial treatment: A review

Research Progress on Ti3C2Tx-Based Composite Materials in Antibacterial Field

Recent progress on Ag/TiO2 photocatalysts: photocatalytic and bactericidal behaviors

TiO 2 -Based Building Materials: above and Beyond Traditional Applications

Synthesis and antibacterial activities of Ag-TiO2/ZIF-8

Research Progress on TiO2-Based Visible Light Photocatalyst

Research progress of photocatalytic sterilization over semiconductors

Titanium dioxide photocatalysis: present situation and future approaches

Studies on Photocatalytic Degradation for Organic Pollutants by TiO2/Au Composite and its Antibacterial Properties

Recent advances in photocatalytic self-cleaning performances of TiO2-based building materials

Enhanced Photocatalytic Antibacterial Properties of TiO2 Nanospheres with Rutile/Anatase Heterophase Junctions and the Archival Paper Protection Application

Antibacterial Properties of TiO2 Film Improved by Hydrogen Reduction Heat Treatment

Self-doping synthesis of nano-TiO2 with outstanding antibacterial properties under visible light

Photoresponsive Materials for Antibacterial Applications