Abstract:In this study, the hot uniaxial compression of the heat-treated Mg-12Y–1Al alloy containing long-period stacking ordered (LPSO) phase was conducted by a Gleeble-3500 simulator. Compressive mechanical properties at elevated temperatures and the effects of deformation temperature (300–450 °C) and strain rate (0.001–1 s −1 ) on the hot deformation behavior of the alloy were systematically investigated. Combining with an optical microscope (OM), electron backscatter diffraction (EBSD), and in-grain misorientation axes (IGMA) analysis, the microstructure and texture evolution, dislocation slip, and dynamic recrystallization (DRX) mechanism of the alloy was studied in detail. The results showed that the flow stress decreased with the increase in temperature and the decrease in strain rate. At a strain rate of 1 s −1 , the compressive strength at 300 °C and 350 °C was basically the same. After deformation, the morphology of Al 2 Y had almost no change, while the LPSO underwent apparent kinking deformation. The increase in temperature was conducive to DRX. The DRX mechanism of the alloy mainly included discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX), and DDRX was dominant. The dense lamellar LPSO at the grain boundary was detrimental to the occurrence of DDRX. In addition, the deformed microstructure presented a typical [0001]//CD (compression direction) texture. With the increase in temperature, the texture intensity decreased progressively due to the activation of multiple slip systems and the increased DRX fraction. At a strain rate of 0.01 s −1 , when the temperature increased to 450 °C, the number of deformed grains dominated by pyramidal II slip increased substantially.

Research on the Properties of Mg-3Al-6Zn-2Y Alloy under Dynamic Compression

The Dynamic Recrystallization in a Hot Compressed Al‐Zn‐Mg‐Cu‐Sc‐Zr Alloy: the Role of Strain Rate

Hot deformation behavior of novel high-strength Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Dynamic compression properties and microstructural evolution of ZCW612 alloy under different strain levels

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Hot compression behavior and microstructure evolution of Mg-Gd-Y-Zn-Zr alloy

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy

Dynamic compression behaviour and microstructural evolution of the Mg–6Zn–2Ce–0.6Zr alloy

Mechanical Behavior and Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy during Multipass Hot Compression Deformation

Mechanical properties and fracture behavior of Mg–3Al–1Zn alloy under high strain rate loading

Revealing the deformation behavior and microstructure evolution in Mg-12Y–1Al alloy during hot compression

Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates

Effect of yttrium addition on dynamic mechanical properties, microstructure, and fracture behavior of extrusion-shear ZC61 + xY (x = 0, 1, 2, 3) alloys

Compressive creep behavior of extruded Mg-4Sm-2Yb-0.6Zn-0.4Zr alloy

Study on Thermal Compression Deformation Behavior and Constitutive Model of Homogenized Mg–5Zn–1Mn Alloy

Microstructure and mechanical properties of extrusion ZC61 alloys under different dynamic compression loading directions

Double-peak Strain Hardening Behavior of Mg–1.2 wt.%Y Alloy

Microstructures, hot tensile deformation behavior and constitutive modeling in a superlight Mg-2.76Li-3Al-2.6Zn-0.39Y alloy

Compressive deformation behavior of ultrafine-grained Mg-3Zn-1.2Ca-0.6Zr alloy at room temperature

Hot compression behavior of Mg–Zn–Y–Mn–Ti magnesium alloy enhanced by lamellar LPSO phase and spherical W phase