Abstract:Earthquake Spectra, Ahead of Print. Typically, it is challenging to incorporate near-surface soils into 3D physics-based numerical simulations (PBSs) for ground-motion prediction. The low shear wave speed of near-surface soils, coupled with the complexity of the soil seismic response, poses significant difficulties. To overcome these limitations, a hybrid approach was proposed in this study, combining PBSs with artificial neural networks (ANNs). The essence of the hybrid method can be summarized as follows: (1) development of ANN models, establishing a strong-motion database, training the ANNs on it to predict the ground-motion parameters for East–West (EW), North–South (NS), and Vertical (UD) directions afterward; (2) establishment of 3D PBS model, obtaining the ground-motion parameters of the bedrock face corresponding to a certain shear wave speed; (3) application of the trained ANNs to predict the ground-motion parameters on the ground surface, taking the simulated results and related site parameters as inputs, and the outputs are peak ground acceleration (PGA) and 5% damped spectral accelerations (Sa) at different periods on the ground surface. In this study, ANN models were trained on a strong-motion database based on Kiban–Kyoshin Network (KiK-net). After several verifications of the ANN predictions, a case study of the 21 October 2016 Mw6.2 Central Tottori earthquake was conducted. In addition to the comparison with observations, the broadband (0.1–10 Hz) results of the hybrid method were also compared with the results that obtained by transfer function based on recorded data and Next Generation Attenuation (NGA)-West2 ground-motion prediction equations (GMPEs) to demonstrate the effectiveness and applicability of the proposed method. In addition, the distribution of Sa for four periods in simulated area was presented. The performance of the hybrid method for predicting broadband ground-motion characteristics was generally satisfactory.

Hybrid simulation of broadband ground motion : Overview

Improvement of Stochastic Green's Function Method for 3D Broadband Ground-Motion Simulation

Stochastic Finite‐Fault Simulation of the Ms 7.0 Lushan Earthquake Based on Frequency‐ and Distance‐Dependent Radiation Patterns

Stochastic Green’s Function Method Considering Non-Uniform Rise Time Distribution to Simulate 3D Broadband Ground Motion

Improvement of Source Spectrum Fall‐Off for Simulating Ground Motion Using Stochastic Green’s Function Method

Ground-motion Simulation Using Stochastic Finite-Fault Method Combined with a Parameter Calibration Process Based on Historical Seismic Data

A New Hybrid Equivalent Modeling Method of Low-Frequency Radiation Source Based on GS and JADE Algorithms and Phaseless Near-Field Data

Hybrid Time-Domain Adaptive Integration Method for Simulating Transient Electromagnetic Responses of an Arbitrary Structure with Large Scale

Broadband ground-motion simulations by coupling regional velocity structures with the geophysical information of specific sites

Novel hybrid numerical simulation of the wave equation by combining physical and numerical representation theorems and a review of hybrid methodologies

An efficient hybrid simulation technique for modeling the electromagnetic field propagation in a closed environment

Predicting the seismic ground-motion parameters: 3D physics-based numerical simulations combined with artificial neural networks

A Hybrid Regional Model for Predicting Ground Deformation Induced by Large-Section Tunnel Excavation

Large-scale simulation of ground motion amplification considering 3D topography and subsurface soils

Investigation and Use of Surface-wave Characteristics for Near-surface Applications

Key Technologies of the Power System Electromagnetic/Electromechanical Real-time Hybrid Simulation

Calibration of a Semi-Stochastic Procedure for Simulating High-Frequency Ground Motions

Spectral representation-based efficient simulation method for fully non-stationary spatially varying ground motions

Improvements to EXSIM in Ground Motion Simulation for Earthquakes Explained by Double‐Corner‐Frequency Source Model

Error Propagation and Control in 2D and 3D Hybrid Seismic Wave Simulations for Box Tomography

Parametric models for ground motion amplification considering 3D topography and subsurface soils