Abstract:three phases are essential to the incremental-iterative analysis of elastically nonlinear structures, which generally followed in sequence: predictor, corrector and error-checking phases. The predictor phase included an assemblage of structural stiffness and the calculation of the incremental displacements, the corrector phase is to calculate the nodal forces, and the error-checking phase is to calculate the unbalanced forces and to update the configuration. In this paper, a modified solution strategy is presented for an elastically framed structure undergoing large displacements and large rotations. In predictor phase, by virtue of the rotational matrix for a rotational vector, three orthogonal vectors which rigidly attached a cross section were determined; using the central displacements and the vectors of cross-sectional principal axes, the displacements and strains for any point on a cross section were accurately determined. Applying the principle of virtual work, interpolating by the cubic Hermite spline, the tangent stiffness matrix was obtained. In the corrector phase, a corotational formulation is used for the recovery of the nodal forces with natural displacements, and it is derived in a corotational configuration which is rigidly moved by the last calculated the configuration in equilibrium. In each incremental load, the geometrical update of the elements are implemented before the incremental displacements are resolved, then the local element-end displacements corresponding to the corotational configuration were obtained; utilizing the stiffness matrix in a corotational configuration is employed to calculate the incremental element-end forces. Several classical numerical examples verified the accuracy and the efficiency of the present solution strategy.

Geometric Stiffening of Flexible Link System with Large Overall Motion

Modified Solution Strategy Of Framed Structures For Geometrically Nonlinear Analysis

Numerical Modeling of Force-Stiffness Response of Cross-Linked Actin Networks Using Tensegrity Systems

Calculation of kinematically indeterminate system based on large deformation analysis

Self-Equilibrium, Mechanism Stiffness, and Self-Stress Design of General Tensegrity with Rigid Bodies or Supports: A Unified Analysis Approach

A COROTATIONAL UPDATED LAGRANGIAN FORMULATION FOR GEOMETRICALLY NONLINEAR ANALYSIS OF 2D FRAMES

Geometric Deviation Modeling by Kinematic Matrix Based on Lagrangian Coordinate

A General Approach to the Large Deflection Problems of Spatial Flexible Rods Using Principal Axes Decomposition of Compliance Matrices

Non-linear joint dynamics and controls of jointed flexible structures with active and viscoelastic joint actuators

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

DYNAMICS OF FLEXIBLE MULTIBODY SYSTEMS USING NONLINEAR EXPRESSION OF DEFORMATION FIELDS

Dynamics of a Rotating Flexible Multi-Link with Viscoelastic Constraining Layers

On The Method Of Linearizing Dynamic-Model And Solving Forward Dynamic Problems Of Flexible Robots

Static Force-Based Modeling and Parameter Estimation for a Deformable Link Composed of Passive Spherical Joints with Preload Forces.

The Smooth Curvature Model: An Efficient Representation of Euler–Bernoulli Flexures as Robot Joints

A Numerical Method for Simulating Nonlinear Mechanical Responses of Tensegrity Structures under Large Deformations

Symplectic analysis on orbit-attitude coupling dynamic problem of spatial rigid rod

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

High-order kinematics of uniform flexures

A regularized approach for frictional impact dynamics of flexible multi-link manipulator arms considering the dynamic stiffening effect

Nonlinear Effects in Stiffness Modeling of Robotic Manipulators