Abstract:The results of two sets of experiments to measure the elastic-plastic behaviour of gold at the nanometre length scale are reported. One set of experiments was on free-standing nanoscale single crystals of gold, and the other was on freestanding nanoscale specimens of open-celled nanoporous gold. Both types of specimens were fabricated from commercially available leaf which was either pure Au or a Au/Ag alloy following by dealloying of the Ag. Mechanical testing specimens of a 'dog-bone' shape were fabricated from the leaf using standard lithographic procedures after the leaf had been glued onto a silicon wafer. The thickness of the gauge portion of the specimens was about 100 nm, the width between 250 nm and 300 nm and the length 7 mu m. The specimens were mechanically loaded with a nanoindenter (MTS) at the approximate midpoint of the gauge length. The resulting force-displacement curve of the single crystal gold was serrated and it was evident that slip localization occurred on individual slip systems; however, the early stages of the plastic deformation occurred in a non-localized manner. The results of detailed finite element analyses of the specimen suggest that the critical resolved shear stress of the gold single crystal was as high as 135 MPa which would lead to a maximum uniaxial stress of about 500 MPa after several per cent strain. The behaviour of the nanoporous gold was substantially different. It exhibited an apparent elastic behaviour until the point where it failed in an apparently brittle manner, although it is assumed that plastic deformation occurred in the ligaments prior to failure. The average elastic stiffness of three specimens was measured to be E-np = 8.8 GPa and the stress at ultimate failure averaged 190 MPa for the three specimens tested. Scaling arguments suggest that the stress in the individual ligaments could approach the theoretical shear strength.

Nonhydrostatic compression of gold powder to 60 GPa in a diamond anvil cell: estimation of compressive strength from x-ray diffraction data

Static Strength of Gold Compressed Up to 127 Gpa

Compressibility And Strength Of Nanocrystalline Tungsten Boride Under Compression To 60gpa

Calibration of Pressure to 35 Gpa for the Cubic Press Using the Diamond-Cemented Carbide Compound Anvil

Lattice Strains in Gold and Rhenium under Non-Hydrostatic Compression

Quasi-Two-Dimensional Gold Nanosheets with Ultrahigh Strength

Deviatoric Stress In A Quasi-Hydrostatic Diamond-Anvil Cell - Effect On The Volume-Based Pressure Calibration

Competitive Effect of Disorder and Defects on Dynamic Structural Transformation of Compressed Gold

X-Ray Imaging Of Stress And Strain Of Diamond, Iron, And Tungsten At Megabar Pressures

The Competitive Mechanism of Defects and Disorders on Dynamic Structural Transformation of Compressed Gold

Elastic Moduli and Strength of Nanocrystalline Cubic Bc2n from X-Ray Diffraction under Nonhydrostatic Compression

Strength Of Rhenium From X-Ray Diffraction Experiments Under Nonhydrostatic Compression To 250 Gpa

Size Dependence of Cubic to Trigonal Structural Distortion in Silver Micro- and Nanocrystals under High Pressure

Compressive Strength of Diamond from First-Principles Calculation

Plastic Deformation in Nanoscale Gold Single Crystals and Open-Celled Nanoporous Gold

Prediction on the Theoretical Strength of Diamond, C-Bn, Cu and CeO 2

The effects of composition and microstructure on compressive strength of Ag-Au nanoparticles

Hard nanocrystalline gold materials prepared via high-pressure phase transformation

X-ray diffraction of ruby (Al2O3:Cr3+) to 175 GPa

Nano-Diamond Compressibility at Pressures Up to 85 GPa

Coherent diffraction imaging of nanoscale strain evolution in a single crystal under high pressure