Abstract:Based on the idea of interconnecting the modular high temperature gas-cooled reactor (mHTGR), steam Rankine cycle, Cu-Cl cycle and high temperature electrolysis (HTE), the schematic design of a multimodular nuclear power-hydrogen cogeneration is proposed. This cogeneration plant can be utilized to balance the net load by redistributing the motive steam between power generation and hydrogen production. The operational flexibility provided by steam redistribution relies heavily on plant-wide coordinated control. Since dynamic modeling is a crucial basis of control design, a lumped-parameter dynamic model of this nuclear cogeneration plant (NCP) is developed and implemented as a numerical simulation program. The steady-state modeling results show that the rated thermal power of this NCP is about 1523 MW, and the maximal values of hydrogen production rate and output electric power are 11.76 metric tons per hour and 647.3 MW, respectively. The open-loop transient analysis shows that the model's dynamic behavior is in good accordance with physical mechanisms. Further, a hierarchical coordinated control scheme is designed for this NCP, providing a load-following control function based upon steam redistribution, and the corresponding validations are also given. For the load decreasing with ramp rate at 8 MW/min and amplitude of 540 MW, the control system guarantees the grid frequency deviation is smaller than 0.2 Hz while the reactor thermal power, as well as the temperatures and pressures of hydrogen production reactions, are maintained around their expected values. The results in this paper show that the mHTGR-based power-hydrogen cogeneration plant is not only a clean source of electricity and hydrogen but also a flexible source for grid frequency stabilization.

Dynamic Modeling on the Hybrid Molten Carbonate Fuel Cell-Gas Turbine Bottoming Cycle

Dynamic Simulation of a Pressurized 220kW Solid Oxide Fuel-Cell–Gas-Turbine Hybrid System: Modeled Performance Compared to Measured Results

A Study of Thermal Transient Performances of Molten Carbonate Fuel Cells

Simulation of PEM Fuel Cells Using the Mixed-domain Model

Modeling And Simulation Of A Modern Pem Fuel Cell System

Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system

Dynamic Simulation of a Solar-Hybrid Microturbine System with Experimental Validation of Main Parts

Simulation of the Dynamic Characteristics of a PEMFC System in Fluctuating Operating Conditions

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

A Multi-Level Simulation Platform of Natural Gas Internal Reforming Solid Oxide Fuel Cell–gas Turbine Hybrid Generation System – Part II. Balancing Units Model Library and System Simulation

Hybrid modeling and simulation of heat storage system in solar thermal power plant

Dynamical Modeling and Coordinated Control Design of a Multimodular Nuclear Power-Hydrogen Cogeneration Plant

Dynamic Simulation and Analysis of Micro-Turbine

Dynamic Fractional-Order Model of Proton Exchange Membrane Fuel Cell System for Sustainability Improvement

Dynamic exploration of a 1 MW molten carbonate electrolyzer: A modeling study approach

A Hardware-in-the-loop Simulation Approach for SOFC-MGT Hybrid Systems

Multi-level simulation platform of SOFC–GT hybrid generation system

Static and Dynamic Performance Modeling and Simulation of a Microturbine

A Vehicular Proton Exchange Membrane Fuel Cell System Co-Simulation Modeling Method Based on the Stack Internal Distribution Parameters Monitoring

Dynamic Modelling and Simulation of a Combined-Cycle Power Plant Integration with Thermal Energy Storage

Dynamic Modeling and Dynamic Responses of Grid-Connected Fuel Cell