Abstract:Single-walled carbon nanotubes (SWNTs) are promising nanomaterials for incorporation into organic electronic devices (OEDs), with the potential to fabricate flexible devices while exploiting inexpensive solution-processing techniques. As-synthesized SWNTs are insoluble and comprised of a mixture of metallic and semiconducting SWNTs (sc-SWNTs), necessitating dispersal and purification before integration into OEDs. Refinement of conjugated polymer extraction techniques has allowed for the isolation of sc-SWNTs from metallic in a reproducible and scalable manner. The availability of highly-pure sc-SWNT materials has facilitated the production of thin-film transistors (TFTs) with very high charge carrier mobilities, outperforming organic small molecule and polymer semiconductors. However, the realization of commercial OED applications of polymer-sorted sc-SWNTs have not yet been achieved, partially due to the prohibitive time and materials costs associated with purifying sc-SWNTs. Current protocols for dispersing sc-SWNTs with conjugated polymers involve three broad steps: (1) dispersion of bulk SWNT material, (2) removal of non-dispersed carbonaceous materials, and (3) removal of excess polymer through filtration or centrifugation. The final step of removal of excess polymer is time-consuming and wasteful, but viewed as necessary for preparing high-performing TFTs, as the conjugated polymer has much lower performance compared to SWNTs. In this study we performed the first systematic investigation of the effect of excess polymer on SWNT TFT performance. Three SWNT concentrations were investigated, with varying ratios of excess polymer added to each. TFT device performance was monitored using several metrics, including: mobility, threshold voltage, on/off ratios and hysteresis. Characterization of large numbers of replicate TFT devices determined that below a threshold amount of excess polymer the presence of excess polymer did not have a negative impact on device performance. Detailed analysis of the sc-SWNT films through Raman spectroscopy and atomic force microscopy (AFM) confirmed that a simple rinsing step was sufficient to remove all the unbound conjugated polymer from the substrate surface without affecting the sc-SWNT network. The volume of solvent required for the rinsing step was substantially lower than that required for filtration or centrifugation steps. Furthermore, at higher SWNT concentrations the excess polymer prevented nanotube bundling, resulting in moderate improvements in both mobility and on/off ratios. Our results were reproducible for two different conjugated polymer sc-SWNT systems, demonstrating the versatility of this procedure.

Effects of single walled carbon nanotubes on the electroluminescent performance of organic light-emitting diodes

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

Electroluminescence From 4-Nitroaryl Organic Color Centers In Semiconducting Single-Wall Carbon Nanotubes

Single-wall Carbon Nanotube/conjugated Polymer Photovoltaic Devices

Modification of carbon nanotube transparent conducting films for electrodes in organic light-emitting diodes

Photovoltaic Properties of Dye Functionalized Single-Wall Carbon Nanotube/Conjugated Polymer Devices

Optimizing Single‐Walled Carbon Nanotube Films for Applications in Electroluminescent Devices

Effects of carbon nanotubes on the electro-optical properties of the twisted nematic liquid crystal display mode

Single-walled Carbon Nanotube–polymer Composites: Electrical, Optical and Structural Investigation

Polymer-Nanotube Composites: Burying Nanotubes Improves Their Field Emission Properties

Hole Blocking in Carbon Nanotube–polymer Composite Organic Light-Emitting Diodes Based on Poly (M-Phenylene Vinylene-Co-2, 5-Dioctoxy-p-phenylene Vinylene)

Study on the effect of singlewalled carbon nanotubes on junction properties of Safranin –T dye-based organic device

Enhanced Brightness in Organic Light-Emitting Diodes Using a Carbon Nanotube Composite As an Electron-Transport Layer

The Effect of Carbon Nanotube/Organic Semiconductor Interfacial Area on the Performance of Organic Transistors

Controllable functionalization of single-wall carbon nanotubes by in situ polymerization method for organic photovoltaic devices

Enhanced device performance using different carbon nanotube types in polymer photovoltaic devices

Near-Intrinsic Photo- and Electroluminescence from Single-Walled Carbon Nanotube Thin Films on BCB-Passivated Surfaces

Influence of Excess Conjugated Wrapping Polymer in Semiconducting Single-Walled Carbon Nanotube Dispersions

Highly transparent, low sheet resistance and stable Tannic acid modified-SWCNT/AgNW double-layer conductive network for organic light emitting diodes

66‐2: Printed Carbon Nanotube Thin‐film Transistors and Application in OLED Backplane Circuits

(Invited) Carbon Nanotube Network As Stable and Efficient Electron Blocking Layer and Transparent Conductive Electrodes for Solar Cells